Would anyone that owns a Benjamin 392 happen to know the part no. for the screw that screws into the bolt and acts as the bolt lug, or what size it is to get at a hardware store?
There are parts diagrams online, but i can't get the files to open on them from my computer...something about i don't have the right support on my computer anymore...time to upgrade this old thing i guess lol.
If not, i'll tear the rifle down again one day next week and take the screw with me to a parts store and just look till i find one.
The way i understand it, you have to have a parts no. to order from crosman.
I don't know if they put mine in a bit too short from the factory or what, but after about 3000 shots, it locked up on me when i pulled the bolt back the other day.
I took it apart and had to shove the hammer out from under the bolt with a screwdriver, then took the side plate off and could see the lug(screw head) was rounded off at an angle on the hammer contact side.
I backed it out 1/2 turn to a high side and have it working for now, but don't know how long it'll stay like that....looks like they may have used a screw that wasn't hardened?
Thanks for any help if anyone knows the parts no.