Does anyone use the same boolit in 30-06 and subsonic 300 Blackout? I'm looking at the NOE 311-230-FN BLKOUT with gc for the 06 and without gc for the blackout. Both to be used for hunting.
|
   
   
|
|
Does anyone use the same boolit in 30-06 and subsonic 300 Blackout? I'm looking at the NOE 311-230-FN BLKOUT with gc for the 06 and without gc for the blackout. Both to be used for hunting.
"EXPERT= Ex is a has been, spurt is a drip under pressure" Unknown
you can go down to 187 grn, I found this on ammoseek
"Ventura Tactical 300 AAC Blackout 187gr Poly-Tipped TMJ Subsonic Ammo - 250 Rounds"
It would depend on what you were hunting
Hogs with suppressed blackout. Deer with the 06.
"EXPERT= Ex is a has been, spurt is a drip under pressure" Unknown
the worst that could happen is you have to buy another mold for the 0-6.
but I have seen that mold shoot pretty well in one 308, and not shoot in another one.
That boolit works well in my 7.62x39 and the 1:10 twist 30-06. Won't stabilize in my 1:14 '06 though. You should be fine.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote