Thanks guys,I'll be re-reading all this when the tools come in.Because I will have forgotten
Thanks guys,I'll be re-reading all this when the tools come in.Because I will have forgotten
Pro Patria-Ne Desit Virtus
Heck. I purposely opened up my Lee .224 size die to size .2255"
I've shot 9mms as large as .360"
I use .311" in all my .308 groove diameter bores.
Since switching to powder coating I'm finding I don't actually need to go big but this is just to point out a little over is no problem.
Your boolits are only too big if they so big that they are snug in your chamber. You should have at least a little room for the case to expand and release the boolits.
Motor
Got the tools.Not working for me.Need a new plan.
Pro Patria-Ne Desit Virtus
I'm still trying to figure out how I can get a 30/30 neck sizing (Lee) insert into the Lee FCD. Then i can throat size for the BO & 30/30. Inset loaded ammo from the top and size the bore-rider part.
Whatever!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |