Currently using Lyman M die in position 3 then seating/ crimping in position 4. Dillon doesn't offer a through powder expander for the ought 6. Any suggestions? I would like to seat and crimp on separate stations.
Currently using Lyman M die in position 3 then seating/ crimping in position 4. Dillon doesn't offer a through powder expander for the ought 6. Any suggestions? I would like to seat and crimp on separate stations.
Custom powder funnel or possibly a 30 carbine funnel.
A custom funnel is likely the answer. Not hard for a buddy with a lathe.
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
pep off press then M-die and prime in station #1.
dump powder in #2.
seat and crimp in 3&4
Dillon makes an expander funnel for .30 cal rifle...
Sent from my iPhone using Tapatalk
I prep off press anyway for rifle, so station one solution is the route I'll go
Dillon 30 Caliber Expander funnel, for 30-30/308 Win and longer cases, #62261
https://www.dillonprecision.com/powd..._49_25279.html
I did not know about the expander funnel from Dillon. I do the resizeing off press as do several others as noted. I have some brass that needs inspection for length and trimming so the off press work is just part of the program.
To paraphrase Ronald Reagan, the trouble with many shooting experts is not that they're ignorant; its just that they know so much that isn't so.
it's the .30 funnel instead of the B funnel.
a shorter version of the 30 carbine.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |