wtb ruger 77/44,357,22 wood stock

[jburris2001]

I just picked up a ruger 77/44 with the plastic stock. want to replace it with a wood one. I know that the stock for the 44 and 357 will fit. But would be interested in one for a 77/22 cause I think it will fit with some slight mods. I like to tinker. let me know if you have one laying around collecting dust. thanks

[JMtoolman]

Just happened to have one right here in my hand. Has the butt plate and the barrel band still on the stock. It's for the 22 but I can see what you mean thinking that it will work, looks like the stock is big enough through the clip area. How about 25 plus shipping? Best regards, the toolman.

[mcdaniel.mac]

Don't mean to hijack but as a 77/357 owner I hope there's a project thread on this one.

[jburris2001]

Jmtoolman pm sent. I will post a thread on it. It is going to be my new project gun. Want to see what kind of groups I can get out of it

[scattershot]

Jmtoolman, are you sure that’s not a stock for a 10/22? I don’t believe the 77/22 had a barrel band.

[JMtoolman]

It is a 10/22 stock, I missed the 77 on the inquery. Jburris if this is not the one let me know. The diameter where the clip goes is 1 1/4 across, and the outside of the stock in that area is 1 3/4. Best regards. the toolman.

[pressonregardless]

Mine doesn't.

[jburris2001]

I've got a 10/22 stock here. Don't need another. Thanks