wtb broken arrows

[turtlezx]

Iam in need of 4" or longer broken or bent arrows with inside diameter of .310 to .350must be aluminum shafts

needed for fill tube for a 410 reloader

thanx turtlezx

[woody1]

Question - does it have to be arrows...aluminum? What's the max outside diameter? There's lots of different varieties of tubing out there. Let me know and I'll give a look in my scrap pile.

[County Hunter]

I have some aluminum shafts, I will check the diameter and reply tomorrow.

[turtlezx]

arrows would be the best strong and thin wall tubing

[KCSO]

Send me your shipping address I have a box full of bent ones you can have.

[pull the trigger]

They can make good .22 reloaders for the tube magazines too

[mazo kid]

Also make nice powder drop tubes for reloading black powder cartridges. I could use a couple myself (arrow shafts) if anyone has extras. Happy to pay mailing cost.

[15meter]

Drop by any sportsman's club that shoots 3d archery, there's usually a bucket of orphan arrows found after a shoot. Lost, bent broken stuff. I used to snag some for my sister, she used them for bows on kites she used to make.

[County Hunter]

I have at least two aluminum arrow shafts, diameter is .3125 inches. Shafts are at least 16 inches long. Send me your address and I will mail them to ya.

[woody1]

I've got arrow shafts at about .31 id but looks like y'all can be taken care of by folks closer to you. If not, drop me a PM.

[turtlezx]

kc and hunter are helping me out with arrows i should be good to go
thanx again for the offers
turtlezx

[richhodg66]

They can make good .22 reloaders for the tube magazines too

I sure like the ingenuity I find on this site. I never would have thought of that, what a great idea!