Lee PrecisionInline FabricationMidSouth Shooters SupplyReloading Everything
RepackboxRotoMetals2Snyders JerkyWideners
Load Data Titan Reloading
Results 1 to 13 of 13

Thread: so whats up with Ultra Dot

  1. #1
    Boolit Grand Master
    white eagle's Avatar
    Join Date
    Jul 2010
    Location
    718 miles E. of Wall Drug
    Posts
    6,175

    so whats up with Ultra Dot

    had one one my 475 Linebaugh Encore that literally fell apart
    I though they were supposed to be so good and I have had ones in the past
    and can tell you I have never seen this
    the back eye piece looked like it was dropped off a ladder and the
    rest of the rear body actually came apart from the main unit
    this was supposedly a new unit but wonder if they sent me a re-worked unit
    or some sort of demo model
    all I know is it would never stay tightened in the factory rings and I actually stripped
    their mounting screw with the supplied wrench which was not the correct size IMO
    and after I replaced the junk scope mounts I checked to see if it was loose again and that is when it
    literally fell apart in my hands
    bit apprehensive about the replacement they are sending
    Hit em'hard
    hit em'often

  2. #2
    Boolit Master
    Join Date
    Jun 2010
    Location
    WNY
    Posts
    2,506
    Never had a problem with any I've owned. I've mounted them on 44mag handguns and 45-70 rifles with no problems what so ever. They need to be mounted correctly like any scope or sight. Over torquing and/or mounting incorrectly can lead to problems. I can't picture what you mean by "the back eye piece looked like it was dropped of a ladder"? Before it fell apart or after? Pics? I can't make heads or tales out of your description of what happened. I doubt they sent you a demo or re-work. What do they say about all of this? They're the ones you should be talking to, not ranting on the internet first.

  3. #3
    Boolit Grand Master
    white eagle's Avatar
    Join Date
    Jul 2010
    Location
    718 miles E. of Wall Drug
    Posts
    6,175
    I suppose I can rant where and when I want
    who are you the internet marshal
    I mean what i said I could never get the optic to hold
    and yes I did have it mounted correctly I to have had them of 44 mags and 45-70 rifles
    and fired them with Ruger #1 loads not watered down loads so I do know what they are supposed to handle
    I talked to them and they are sending another on if you would have read the post you would know that
    So sorry you never had a problem with them but that doesn't mean that there aren't people that do sheriff
    don't make any difference to me if you can't picture anything
    Hit em'hard
    hit em'often

  4. #4
    Super Moderator


    ShooterAZ's Avatar
    Join Date
    Jan 2012
    Location
    Flagstaff, AZ
    Posts
    12,188
    Please keep things civil here guys...

  5. #5
    Boolit Grand Master
    white eagle's Avatar
    Join Date
    Jul 2010
    Location
    718 miles E. of Wall Drug
    Posts
    6,175
    now I gotta say this can't happen twice rite?
    wrong
    brand new out of the box fell apart again
    the lense closest to the eye can't take the recoil of a 475 Linebaugh
    the first shots grouped nice at 9 oclock 1"from bull and a touch low
    no prob move it to the right 3 clicks and up 3
    now on center but not quite high enough so up 3 more
    now its just a bit to much down 2 but instead of 1/2"it drops to the bottom
    of the paper and that lense is loose and almost looks like it was driven into the
    tube body
    well that enough for me my new Ultra Junk is going back not wasting anymore
    ammo with this ***
    not sure what they are doing different but something certainly aint working
    Hit em'hard
    hit em'often

  6. #6
    Boolit Master

    lefty o's Avatar
    Join Date
    Dec 2012
    Posts
    2,187
    imo the .475L and .454 are another world in recoil compared to 44mags, 45-70's etc. they are going to find weak optics sooner rather than later.

  7. #7
    Boolit Grand Master
    white eagle's Avatar
    Join Date
    Jul 2010
    Location
    718 miles E. of Wall Drug
    Posts
    6,175
    yes that is very apparent I believe I fired 7-8 rounds to find out
    I hate to go with a scope but had no option
    deer season opens for gun on Sat..
    Hit em'hard
    hit em'often

  8. #8
    Boolit Buddy

    Join Date
    Nov 2014
    Location
    Homosassa, FL
    Posts
    250
    Ultra Dot makes a quality sight. I have a couple of them I used for years when I was shooting competition. They were the most common sight used by the better shooters. I never had any problems nor did I know anyone who did. Sorry to hear you had a bad experience but I never seen anyone who had anything bad to say about Ultra Dot. Curious to hear what the company does about your issues.

  9. #9
    Boolit Grand Master
    white eagle's Avatar
    Join Date
    Jul 2010
    Location
    718 miles E. of Wall Drug
    Posts
    6,175
    they replace the first one
    and the second I asked for a refund and they
    are giving it to me
    yeah I have used them before
    just to much for it on a 475L encore
    Hit em'hard
    hit em'often

  10. #10
    Boolit Grand Master
    white eagle's Avatar
    Join Date
    Jul 2010
    Location
    718 miles E. of Wall Drug
    Posts
    6,175
    Success I got it shooting where I want and it didn't fall apart
    my 90 dollar scope from Cabelas
    Hit em'hard
    hit em'often

  11. #11
    Boolit Master




    41 mag fan's Avatar
    Join Date
    Feb 2008
    Location
    The Cross Roads Of America State
    Posts
    2,695
    Sound like a normal thing anymore..companies rush to get the product to the shelf and quality takes a back seat. Look at the gun industry as a whole. quality has dropped considerably esp when obama was in office.
    Hate to hear the problems you had white eagle. hopefully the cabelas scope gets the job done

  12. #12
    Boolit Master
    JBinMN's Avatar
    Join Date
    Feb 2017
    Location
    Goodhue County, SE Minnesota
    Posts
    3,080
    G'Luck in the 3B season! Hope it works for ya when ya need it!
    2nd Amend./U.S. Const. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."

    ~~ WWG1WGA ~~

    Restore the Republic!!!

    For the Fudds > "Those who appease a tiger, do so in the hope that the tiger will eat them last." -Winston Churchill.

    President Reagan tells it like it is: https://www.youtube.com/watch?v=c6MwPgPK7WQ

    Phil Robertson explains the Wall: https://youtu.be/f9d1Wof7S4o

  13. #13
    Boolit Buddy
    Join Date
    Sep 2013
    Posts
    103
    Quote Originally Posted by white eagle View Post
    had one one my 475 Linebaugh Encore that literally fell apart
    I though they were supposed to be so good and I have had ones in the past
    and can tell you I have never seen this
    the back eye piece looked like it was dropped off a ladder and the
    rest of the rear body actually came apart from the main unit
    this was supposedly a new unit but wonder if they sent me a re-worked unit
    or some sort of demo model
    all I know is it would never stay tightened in the factory rings and I actually stripped
    their mounting screw with the supplied wrench which was not the correct size IMO
    and after I replaced the junk scope mounts I checked to see if it was loose again and that is when it
    literally fell apart in my hands
    bit apprehensive about the replacement they are sending
    I never thought for a minute that the factory rings were going to hold even on a slide mount .45 auto and never mounted them on anything other than a .22 conversion unit . I have one on a .500 smith with many full power loads and never had a problem with it mounted in weigand rings. Those UD supplied rings ARE junk.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check