Graf & SonsMidSouth Shooters SupplyStainLess Steel MediaRotoMetals2
Lee PrecisionADvertise hereTitan ReloadingInline Fabrication

Page 1 of 3 123 LastLast
Results 1 to 20 of 59

Thread: MP RCBS 38 150 SWC HP Clone Group Buy

  1. #1
    Boolit Master Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    941

    MP RCBS 38 150 SWC HP Clone Group Buy

    Hello Guys

    I just got informed by Miha that we can open a group buy for this design in a cramer HP.
    The as cast weight in solid form is 154 ish depending on alloy. HP dimensions are forth coming and we will give weights at that time and post them in the buy.

    There has been very little if nothing done with this bullet in the hollow point world until now.
    Tell your friends and get the word out

    This bullet it shoots great in any revolver I have tried it in and will even load in the Smith N frame which is notorious for being hard to get a bullet in.
    I shoot it in my Smith model 28 all the time with brass trimmed to spec.
    There is a nice write up done by Glen Fryxell about how this mold and the Lyman 358477 shoot neck and neck and is super accurate.
    This mold has only ever been available in the 2 Cavity version non hollow point until now.

    Miha is working on HP stuff now

    Click image for larger version. 

Name:	896D9826-FECE-4629-8215-26020CB3CED1.jpg 
Views:	27 
Size:	51.8 KB 
ID:	214114Click image for larger version. 

Name:	Rcbs 38 150.jpg 
Views:	125 
Size:	17.4 KB 
ID:	206578


    Here are the options -

    1) Solids will be available in or 6 cavity brass or 8 cavity aluminum with the lee style sprue cutter.
    2) The Hollow point versions will be available in 2 or 4 cavity brass.
    3) You have an option of .358 or .360 diameters
    4) You also have an option of a smooth sided version for coating with P.C. or Hi Tek.

    The costs will be as follows-

    - 2 Cavity HP all pins included 95 Euro's (80,75 with discount)
    - 4 Cavity HP all pins included 135 Euro's (114,75 with discount)

    - 6 Cavity solid Brass 95 Euro's (80,75 with discount)
    - 8 Cavity solid Aluminum 95 Euro's (80,75 with discount)

    The above prices do include discount!

    The conversion of Euro's to dollars will happen when Miha sends the invoice via PayPal.

    GROUP BUY DISCOUNT OF 15% GIVEN AT INVOICE TIME

    Please include your disguised email address and what mold design with options you would like.


    HP Regular Lube groove Buy List
    1) kahngr at potsdam dot edu - 2 Cavity HP .360 with handles
    2) jem10 at bellsouth dot net - 2 Cavity HP .360
    3) dearborn416 AT yahoo DOT com - 4 Cavity HP .360
    4) cvcooks at astound dot net - 4 Cavity HP .360
    5) darren dot hain at alyrin dot com - 4 Cavity HP .360
    6) gnslgr1911 at yahoo dot com - 4 Cavity HP .360
    7) meadmkr at yahoo dot com - 4 Cavity HP .360
    8) lacresta at hotmaildotcom - 4 Cavity HP .360 with handles
    9) rodrick dot reidsma at gmail dot com - 4 Cavity HP .358
    10) ikarus1 at carolina dot rr period com - 4 Cavity HP .360
    11)
    12)
    13)

    HP Hi Tek design
    1) Yellowsevenpot at gmail . Com - 4 Cavity HP .360
    2) max at yvmarine dot com - 4 Cav HP .358
    3)
    4)
    5)

    NON HP regular lube groove solid
    1) kredig81 at gmail . com - 8 Cav Aluminum .358
    2) darren dot hain at alyrin dot com - 6 Cavity Brass .360
    3) mhkilgore at mac dot com - 8 Cavity Aluminum .358
    4) mhkilgore at mac dot com - 8 Cavity Aluminum .360
    5) vefa01-raps (at) freenet (dot) de - 8 Cavity Aluminum .358
    6)
    7)
    8)

    NON HP Hi Tek solid
    1) Kitikadavies at gmail dot com - 8 Cav Aluminum .360
    2) max at yvmarine dot com - 8 Cav Aluminum .358
    3)
    4)
    5)
    Last edited by Wasalmonslayer; Today at 11:03 AM.

  2. #2
    Boolit Master
    georgerkahn's Avatar
    Join Date
    Sep 2013
    Location
    South of the (Canada) border
    Posts
    599
    I will be privileged to purchase:
    One Two-cavity Hollow Point (normal, regular lub) Version in 0.360" diameter, brass, with all pins, top punch, Allen keys, and one set of Handles.
    georgerkahn
    kahngr at potsdam dot edu

  3. #3
    Boolit Master Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    941
    Quote Originally Posted by georgerkahn View Post
    I will be privileged to purchase:
    One Two-cavity Hollow Point (normal, regular lub) Version in 0.360" diameter, brass, with all pins, top punch, Allen keys, and one set of Handles.
    georgerkahn
    kahngr at potsdam dot edu
    Got you down my friend!

    Thanks

  4. #4
    Boolit Master Low Budget Shooter's Avatar
    Join Date
    Feb 2010
    Location
    Texahoma
    Posts
    390

    HP Pin Dimensions?

    Wasalmonslayer, thanks for working on these mold orders!

    My two cents worth on HP pin dimensions:

    1. for 38 Special: .160" .315" deep 7 degree taper
    2. for .357 Magnum: .140" .315" deep 10 degree taper


    Thanks again!

    Jeff
    A box of premium carry ammo is too expensive at about $30, so I've spent $1,000 on molds, lead, lube, primers, and powder over the past 10 years to make some that's cheaper!

  5. #5
    Boolit Master Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    941
    Quote Originally Posted by Low Budget Shooter View Post
    Wasalmonslayer, thanks for working on these mold orders!

    My two cents worth on HP pin dimensions:

    1. for 38 Special: .160" .315" deep 7 degree taper
    2. for .357 Magnum: .140" .315" deep 10 degree taper


    Thanks again!

    Jeff
    That is right along the lines of what I was thinking too....

    It is a lot of work herding the cats for these buys but the finished product is well worth it

    Thanks for your input!

  6. #6
    Boolit Man
    Join Date
    Jan 2011
    Location
    West. Aus
    Posts
    140
    Put me down for an 8 cavity hitek .358 please. Kitikadavies at gmail dot com. Will it still have the crimp groove?

  7. #7
    Boolit Master Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    941
    Quote Originally Posted by Kitika View Post
    Put me down for an 8 cavity hitek .358 please. Kitikadavies at gmail dot com. Will it still have the crimp groove?

    Yes sir it will have the crimp groove

  8. #8
    Boolit Man
    Join Date
    Jan 2011
    Location
    West. Aus
    Posts
    140
    Great put me down for one

  9. #9
    Boolit Master Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    941
    Quote Originally Posted by Kitika View Post
    Put me down for an 8 cavity hitek .358 please. Kitikadavies at gmail dot com. Will it still have the crimp groove?
    Got you down.

    Thanks!

  10. #10
    Boolit Buddy
    Join Date
    Sep 2015
    Location
    East TN
    Posts
    51
    I am in for one brass 2 Cavity HP with regular Lube grooves @ 360.
    jem10 at bellsouth dot net
    Last edited by jem102; 10-29-2017 at 06:27 PM. Reason: Size

  11. #11
    Boolit Master Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    941
    Quote Originally Posted by jem102 View Post
    I am in for one brass 2 Cavity HP with regular Lube grooves @ 360.
    jem10 at bellsouth dot net
    Got you down.

    Thanks!

  12. #12
    Boolit Master Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    941
    Saturday bump

  13. #13
    Boolit Master Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    941
    Bump for a personal favorite

  14. #14
    Boolit Bub
    Join Date
    Apr 2015
    Posts
    24
    4 cavity HP

    dearborn416 AT yahoo DOT com

    Thank you,
    Ryan

  15. #15
    Boolit Master Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    941
    Quote Originally Posted by ryan View Post
    4 cavity HP

    dearborn416 AT yahoo DOT com

    Thank you,
    Ryan
    Got you down. What size would you like it to cast to?? .358 or .360

    Thanks

  16. #16
    Boolit Bub
    Join Date
    Apr 2015
    Location
    Spokane, WA
    Posts
    21
    Will the hp hitek have the crimp grove?

    Sent from my SM-G925V using Tapatalk

  17. #17
    Boolit Master Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    941
    Quote Originally Posted by Yellowseven View Post
    Will the hp hitek have the crimp grove?

    Sent from my SM-G925V using Tapatalk
    Yes it will still have the crimp groove

  18. #18
    Boolit Bub
    Join Date
    Apr 2015
    Location
    Spokane, WA
    Posts
    21
    Non hp hitek solid 8 cavity .360

    Yellowsevenpot at gmail . Com

    Sent from my SM-G925V using Tapatalk

  19. #19
    Boolit Bub
    Join Date
    Apr 2015
    Location
    Spokane, WA
    Posts
    21
    Please disregard that last post.

    Sign me up for a 4 cavity hp hitek mold at .360

    My fingers were working faster than my brain.

    Yellowsevenpot at gmail . Com

    Sent from my SM-G925V using Tapatalk

  20. #20
    Boolit Master Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    941
    Quote Originally Posted by Yellowseven View Post
    Please disregard that last post.

    Sign me up for a 4 cavity hp hitek mold at .360

    My fingers were working faster than my brain.

    Yellowsevenpot at gmail . Com

    Sent from my SM-G925V using Tapatalk
    No worries got you down

    Thanks!

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check