It´s maybe perhaps left one 6- or 8-cavity solid mold?
Questioning curious Charles
It´s maybe perhaps left one 6- or 8-cavity solid mold?
Questioning curious Charles
Miha, I sent you a PM on 24 January. Got neither a reply from you nor a PayPal invoice. Will you check? Thanks.
Got mine today! Already cleaned and on it’s first heat cycle. Can’t wait to try it after the kids go to bed!
I only had time to cast < 100 boolits, but so far I’m impressed with the mold. The boolits drop effortlessly!
With my alloy (pure Captain’s range scrap) I’m dropping at .3586 and they weigh 154gn with the bevel base. Pretty much exactly as described.
Bravo, MP!
Mine showed up today (9 days from opposite end of the planet not bad) and I was able to cast and coat a couple hundred and load up a few dummy rounds (1.105 passes my tightest case gauge and chambers and extracts from the ar9 that I have never been able to work with cast) I think I'm going to like this mold it drops at about 154.9 with a 4.5-1 blend of range scrap and foundry metal and while I did not measure the diameter they dropped through a .357 sizer with minimal effort.
Last edited by Papercidal; 03-10-2018 at 01:08 AM.
You guys are getting me REALLY excited about this mold!!! My intention was exactly for heavy loads on my AR9 and your info is confirming what I was hoping. According to the tracking info Miha gave us, mine is sitting in the distribution center in Queens, which means it made it through customs and is in its last stage to delivery... Maybe I'll get lucky and see it tomorrow...
Mine is at the post office. Saturday AM pick up tomorrow if I want it right away. Hmm, miss part of USPSA practice or get the mold? NO BRAINER.
I loaded up 10 at 1.105 over 3gr wsf this morning and ran them over the chronograph low was 833& high was 866 with most being around 850. I will have to load a few more up next week and shoot for accuracy but the sub starting load charge cycled the g17 perfectly and seemed reasonably accurate.
I still have some molds. PM me if you want one
I would like a 4 cavity HP .358 if there is one available.
chevelle71-at-hotmail.com
I still have some molds on hands.
Pm me if you want one
For anyone interested in load data, I have posted my findings from the range today at: http://castboolits.gunloads.com/show...Hitek)-for-9mm
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |