Inline FabricationRepackboxRotoMetals2Wideners
Snyders JerkyMidSouth Shooters SupplyLoad DataReloading Everything
Lee Precision Titan Reloading
Results 1 to 13 of 13

Thread: WTT Lead/alloys for 9MM Nickle brass

  1. 10-19-2017, 04:29 PM #1
    Grmps
    Grmps is offline
    Banned
    Join Date
    Jul 2016
    Posts
    2,911

    WTT Lead/alloys for 9MM Nickle brass

    Looking to trade pure 5 BHN, 12 BHN lead or Monotype+CU for 9MM Nickle brass? (Also interested in 32 WS & 7.65 Argentine)
    (The 12 BHN is a mix of COWW+Old lead boolits)

    I have Monotype in the raw or smelted form.

    Smelted Monotype Tested By BNE
    Sample #1
    Pb = 72.0%
    Sb = 17.6%
    Sn = 9.4%
    Cu = 1.0%

    Sample #2
    Pb = 73.0%
    Sb = 16.7%
    Sn = 9.4%
    Cu = 0.9%

    Looking for 1,000 cases to convert to 9X18 MAK

    Let me know what you would want in trade for them.

    Naturally, I will go with the best deal I will consider doing 2 lots of 500

    JIm
    Last edited by Grmps; 10-20-2017 at 12:53 AM.
  2. 10-19-2017, 05:43 PM #2
    RogerDat
    RogerDat is offline
    Moderator
    RogerDat's Avatar
    Join Date
    Nov 2013
    Location
    Michigan Lansing Area
    Posts
    5,750
    I'm not sure how many I have not anywhere near 1000 but it is less than coffee can full not sure how many are nickel. I'll check and send a PM to let you know what I find.
    Scrap.... because all the really pithy and emphatic four letter words were taken and we had to describe this source of casting material somehow so we added an "S" to what non casters and wives call what we collect.

    Kind of hard to claim to love America while one is hating half the Americans that disagree with you. One nation indivisible requires work.

    Feedback page http://castboolits.gunloads.com/show...light=RogerDat
  3. 10-19-2017, 07:43 PM #3
    baogongmeo
    baogongmeo is offline
    Boolit Buddy
    Join Date
    Apr 2014
    Location
    mid MO.
    Posts
    171
    If your not in a hurry I can search through my stash but it will probably be 3 weeks or so and even then I'm not sure that I can come up with 1000... but... hey 25 or 30 coffee cans full that's only 40 or so per can... I would REALLY like some of your monotype.
    Let me know and I'll start going through cans at night... my Mrs. will love it!
  4. 10-19-2017, 09:10 PM #4
    whtsmoke
    whtsmoke is offline
    Boolit Buddy


    whtsmoke's Avatar
    Join Date
    May 2012
    Posts
    161
    GRMPS, I just might have that many in nickel, I will have to check(count) them tomorrow afternoon when I get home from work and let you know, bought them and never used them.
    We were brothers then, we are brothers now, we are brothers forever. Currahee
  5. 10-20-2017, 12:25 AM #5
    Dpmsman
    Dpmsman is offline
    Boolit Buddy
    Join Date
    Mar 2015
    Location
    Minnesota
    Posts
    228
    I also might have 1000. For sure 500. I'd be interested in some soft lead.
  6. 10-20-2017, 01:35 AM #6
    hardcase54
    hardcase54 is offline
    Boolit Buddy
    hardcase54's Avatar
    Join Date
    Nov 2009
    Location
    Virginia
    Posts
    276
    GRMPS I have a small flat rate box full hiding on my bench, pm me your address and I'll send them to you.
    " CANCER SUCKS" I swage .224, 6mm, 7mm, .308, 9mm, .40, .429. Also 9 to 30 jackets, and 9 to 9 jackets.
  7. 10-20-2017, 10:48 PM #7
    BK7saum
    BK7saum is offline
    Boolit Master
    Join Date
    Mar 2011
    Location
    oklahoma
    Posts
    2,485
    If you are still looking for/needing nickel 9mm, pm me, but sounds like you might be taken care of already.
  8. 10-21-2017, 12:39 AM #8
    Grmps
    Grmps is offline
    Banned
    Join Date
    Jul 2016
    Posts
    2,911
    Thanks for your responses.

    Please PM me with how much of what lead /lead alloy you want for how many cases.



    Last edited by Grmps; 10-21-2017 at 03:31 PM.
  9. 10-21-2017, 03:34 PM #9
    Grmps
    Grmps is offline
    Banned
    Join Date
    Jul 2016
    Posts
    2,911
    Several people interested, BUT:

    I'm Still looking for an offer!

    Also interested in 32 WS brass

    Please PM me with how much of what lead /lead alloy you want for how many cases.

    Thanks

    Jim
  10. 10-22-2017, 04:40 PM #10
    Grmps
    Grmps is offline
    Banned
    Join Date
    Jul 2016
    Posts
    2,911
    Sunday bump
  11. 10-23-2017, 05:11 PM #11
    Grmps
    Grmps is offline
    Banned
    Join Date
    Jul 2016
    Posts
    2,911
    Monday bump
    Please PM with an offer if interested.
  12. 10-24-2017, 01:58 PM #12
    Grmps
    Grmps is offline
    Banned
    Join Date
    Jul 2016
    Posts
    2,911






  13. 10-26-2017, 08:13 PM #13
    Grmps
    Grmps is offline
    Banned
    Join Date
    Jul 2016
    Posts
    2,911
    please close this thread
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check