Any Interest in an MP made 147gr smooth (HiTek) for 9mm?

[Lakehouse2012]

I've updated this post because I've added a pic of calculations I've done that would make a great 147 grain boolit. Taking his MP359-135 and simply removing the lube groove will give a solid land area and by my calculations will give a 147-150 grain boolit. interested?

1) No lube grooves, perfect for Hitek users.
2) 147 grain
3) 6 or even 8 cavity mold

Attachment 206414

[bamabound]

I would if it could be offered in a .358 diameter


Sent from my SM-G955U using Tapatalk

[galaxy]

I'd definitely buy. Agree with 358. Don't know if penta would be possible, but would love to give that option a try. All pins has my vote.

[Lakehouse2012]

I would if it could be offered in a .358 diameter


Sent from my SM-G955U using Tapatalk

I agree with 358, would you still be interested if it went to 359 or 360? Sizing has been pretty easy for my other 360 MP mold to size back to 3575

Sent from my SM-G920V using Tapatalk

[Wayne S]

I just found a closed buy, from 2012 where this one was built... Anyone have interest if it were one of these?

http://castboolits.gunloads.com/show...rnativ-coating

Maybe W/O the "boat tail"
what ever happened to this
http://castboolits.gunloads.com/show...7-FN-556-clone ??
To meet the most needs it needs to be a conventional design with a "grease groove" as well as slick sided for those that P/C

[Lakehouse2012]

This one is now posted in the Active GB area. Let me know if your interested.

I've made changes to my original post to try and get some discussion going.

Maybe W/O the "boat tail"
what ever happened to this
http://castboolits.gunloads.com/show...7-FN-556-clone ??
To meet the most needs it needs to be a conventional design with a "grease groove" as well as slick sided for those that P/C

I'd definitely buy. Agree with 358. Don't know if penta would be possible, but would love to give that option a try. All pins has my vote.

I would if it could be offered in a .358 diameter


Sent from my SM-G955U using Tapatalk

[bamabound]

I agree with 358, would you still be interested if it went to 359 or 360? Sizing has been pretty easy for my other 360 MP mold to size back to 3575

Sent from my SM-G920V using Tapatalk

For me it would be too big. I don't want to size my bullets before and after PC.

Sent from my SM-G955U using Tapatalk