Lee PrecisionTitan ReloadingWidenersRepackbox
Inline FabricationMidSouth Shooters SupplyLoad DataReloading Everything
RotoMetals2
Results 1 to 9 of 9

Thread: Ballard Press

  1. #1
    Banned
    Join Date
    May 2008
    Location
    In the Gopher State of Minnesota
    Posts
    6,711

    Ballard Press

    I bought this several years ago, sight un seen. It was described as a .44 Russian press. At least that is what the seller thought the dies and bag of brass and ammo should fit.

    It took many more years before I accidentally stumbled across a B&W picture of a press that is it's near twin. It was called a Ballard. I have yet to locate anything in print about this press, where it was made or by whom.

    After a lot of measuring and digging through old books I figured out the ammo and dies are for the .50 USN cartridge used in a rolling block pistol.

    Missing is the powder measure and probably something else judging from the holes in the frame.

    Ken
    Attached Thumbnails Attached Thumbnails IMG_1552.jpg  

  2. #2
    Boolit Master
    Join Date
    Nov 2012
    Location
    New York, the empire State
    Posts
    1,595
    That is a Great looking press. Never seen One.. Great addition to any collection. Any further detail Photo's would be helpful
    Sal
    NRA Endowment Member
    International Ammunition Association
    New York, the Empire State Where Empires were Won and Lost

  3. #3
    Boolit Master
    Bent Ramrod's Avatar
    Join Date
    Apr 2005
    Location
    Southern Arizona
    Posts
    4,284
    Don’t know how you keep finding this arcane stuff, Ken. That is amazing!

    The only reasonably modern Ballards I know of that provided shooting stuff were Bill Ballard, who made brass cases for obsolete calibers, and other such accessories, and Tom Ballard, who made custom moulds. I think I have Bill’s catalog in my files; if I can find it I’ll see if there is any mention of loading equipment. Tom (I think) retired fairly recently. I have one of his moulds but no other info than the occasional mentions in Venturino’s and others’ writings on black powder cartridge reloading.

    A good machinist/patternmaker with access to a foundry could do a one-off like that, no doubt.

  4. #4
    Boolit Master
    LUBEDUDE's Avatar
    Join Date
    Dec 2008
    Location
    East Texas
    Posts
    2,678
    What a nice prize there Ken. Too bad that there is not much information available. Thanks for sharing.
    TEAM HOLLYWOOD

    NRA- LIFE TSRA-LIFE SASS-LIFE

  5. #5
    Boolit Grand Master Artful's Avatar
    Join Date
    Sep 2007
    Location
    Valley of the SUNs, AZ
    Posts
    9,254
    What a cool find - seems like reloading presses have gone the way of the auto industry where it's getting harder to find truely new models that don't look like other makers models.
    je suis charlie

    It is better to live one day as a LION than a dozen days as a Sheep.

    Thomas Jefferson Quotations:
    "The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government."

  6. #6
    Boolit Buddy Mike Kerr's Avatar
    Join Date
    Jan 2011
    Location
    Garland, Tx
    Posts
    398
    I can not contribute anything new but I must comment just the same. That is a cool looking press. It looks so complex compared to the usual vintage press it must have quite a tale to tell if we can learn its language. Very cool indeed.
    regards,


  7. #7
    Banned
    Join Date
    May 2008
    Location
    In the Gopher State of Minnesota
    Posts
    6,711
    I am not sure I fully understand how the dies work. Two pictures from the rear. The "box" at the bottom is the spent primer catcher.
    Pictures of the dies and the massive boolit fired. They would have been a handful.
    The dies shown are the seater body and an extra stem along with a punch for primer seating and some spare parts that do?

    Ken

    Click image for larger version. 

Name:	IMG_1584.jpg 
Views:	20 
Size:	67.8 KB 
ID:	206023


    Click image for larger version. 

Name:	IMG_1578.jpg 
Views:	23 
Size:	27.0 KB 
ID:	206017Click image for larger version. 

Name:	IMG_1579.jpg 
Views:	21 
Size:	30.8 KB 
ID:	206018Click image for larger version. 

Name:	IMG_1581.jpg 
Views:	23 
Size:	45.1 KB 
ID:	206019Click image for larger version. 

Name:	IMG_1583.jpg 
Views:	21 
Size:	50.2 KB 
ID:	206022

  8. #8
    Boolit Master
    Join Date
    Nov 2012
    Location
    New York, the empire State
    Posts
    1,595
    From your Original Post You said The Dies were for 50 USN rolling Block Pistol. Most Original Cartridges I have seen were Large Berdan Primers 6.45mm.
    Is the case shown Boxer with That diameter. If it is I do have new Boxer Primers with That size 6.45MM
    Sal
    NRA Endowment Member
    International Ammunition Association
    New York, the Empire State Where Empires were Won and Lost

  9. #9
    Banned
    Join Date
    May 2008
    Location
    In the Gopher State of Minnesota
    Posts
    6,711
    Sal, the brass is made from something else, no head stamps. And the length varies, these were the longer ones. I have not measured the primers.

    Ken

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check