Titan ReloadingInline FabricationLee PrecisionMidSouth Shooters Supply
StainLess Steel MediaRotoMetals2Graf & SonsADvertise here

Page 1 of 2 12 LastLast
Results 1 to 20 of 36

Thread: 10 Gauge Slug Bullet

  1. #1

    10 Gauge Slug Bullet

    So after the success of the Ball, I am moving onto Full Brass with a Foster style Slug / Paradox Bullet.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	10g.jpg 
Views:	31 
Size:	21.0 KB 
ID:	205629  

  2. #2
    Here she is next to a .44 Magnum

    Click image for larger version. 

Name:	IMG_2555.jpg 
Views:	27 
Size:	50.4 KB 
ID:	205630

  3. #3
    I have made the Slug mould myself, designing it in 3D (taking advantage of the volume setting to ensure I know its exact grains when cast in lead.) I used a round ball model for reference and am currently trying a couple of different designs. My load so far is the same as the round ball, but dipping these in wax to fill the lube grooves which when I push them in shaves off the excess and holds them in.

    Click image for larger version. 

Name:	10g2.jpg 
Views:	22 
Size:	33.4 KB 
ID:	205631

    Click image for larger version. 

Name:	IMG_2556.JPG 
Views:	28 
Size:	125.8 KB 
ID:	205632

  4. #4
    It makes bloomin big holes where I point it at 25 meters, but I need to work on the column stack and powder load a little.

    Click image for larger version. 

Name:	IMG_2527.jpg 
Views:	22 
Size:	45.1 KB 
ID:	205633

    Click image for larger version. 

Name:	IMG_2524.jpg 
Views:	25 
Size:	81.1 KB 
ID:	205634

  5. #5
    Boolit Master kens's Avatar
    Join Date
    May 2013
    Location
    coastal Ga
    Posts
    723
    is that a hollow base?
    are you flying it like a badminton birdie?

  6. #6
    Yep and yep !

    Quote Originally Posted by kens View Post
    is that a hollow base?
    are you flying it like a badminton birdie?

  7. #7
    Boolit Master Tripplebeards's Avatar
    Join Date
    Apr 2017
    Location
    The great north
    Posts
    651
    Lol! Awsome! My browning gold national wild turkey federation 10 gauge will will shoot fist size groups with a turkey choke at 75 yards with federal 2.5. Oz slugs and look like a silver dollar when they flatten out. It's a beast.

  8. #8
    Boolit Master Oklahoma Rebel's Avatar
    Join Date
    Nov 2015
    Location
    outside of Sand Springs, N.E. OK
    Posts
    2,029
    so how much do these things weigh? and how many grains is 2.5oz tripplebeards?
    Norinco SKS
    mosin nagant est 1937
    S&W 15-2 combat masterpiece
    Remington 597 22lr w/30 rnd clip
    12ga NEF single shot
    heritage 22lr/22mag

  9. #9
    Boolit Master
    Join Date
    Jan 2011
    Location
    NE Kansas
    Posts
    718
    Divide the number of grains in a pound by the number of ounces in a pound and multiply by 2.5 and you have your answer.

  10. #10
    Boolit Master Tripplebeards's Avatar
    Join Date
    Apr 2017
    Location
    The great north
    Posts
    651
    Don't know, you could google it. Mine I'm talking about are factory loaded federal classic slugs.

    Wait...I just did it....1093.74 grains

  11. #11
    Boolit Master bikerbeans's Avatar
    Join Date
    Feb 2013
    Posts
    1,103
    The only federal 10ga slugs I have seen are 1 3/4 oz.

    BB

  12. #12
    Boolit Master Tripplebeards's Avatar
    Join Date
    Apr 2017
    Location
    The great north
    Posts
    651
    Your right. It's been a long time since I looked at them. I'm thinking of the old Remington turkey shot I used in them.

  13. #13
    Boolit Master Tripplebeards's Avatar
    Join Date
    Apr 2017
    Location
    The great north
    Posts
    651
    Tong, what are you shooting them in? I have an old 1800's 10 gauge 2 7/8" Charles Daly side by side that is missing one hammer I'd like to load some black powder loads for. Hopefully I'll end my quest for a hammer some day .

  14. #14
    Boolit Master NoAngel's Avatar
    Join Date
    Oct 2014
    Posts
    810
    My shoulder hurts just from looking at the photo.
    When dealing with islam one should always ask themselves: "What would Leonidas do?"

  15. #15
    Yes these are 1 3/4oz in weight.

    Quote Originally Posted by bikerbeans View Post
    The only federal 10ga slugs I have seen are 1 3/4 oz.

    BB

  16. #16
    I am shooting them out of the thick barreled Harrington and Richardson Single barrel shotgun

    Click image for larger version. 

Name:	IMG_2552[1].jpg 
Views:	16 
Size:	23.6 KB 
ID:	205697

    Quote Originally Posted by Tripplebeards View Post
    Tong, what are you shooting them in? I have an old 1800's 10 gauge 2 7/8" Charles Daly side by side that is missing one hammer I'd like to load some black powder loads for. Hopefully I'll end my quest for a hammer some day .

  17. #17
    Boolit Master Tripplebeards's Avatar
    Join Date
    Apr 2017
    Location
    The great north
    Posts
    651
    Had one 20 years ago with a removable choke tube. It gave me a belting like the 10 gauge browning pumps which all went down the road. My semi auto 10 kicks less than a 12 gauge.

  18. #18
    Boolit Master
    Join Date
    Jun 2010
    Location
    Southern Illinois
    Posts
    463
    What brand is those brass cases..? Lenth ?

  19. #19
    Boolit Master bikerbeans's Avatar
    Join Date
    Feb 2013
    Posts
    1,103
    Mr.T,

    Is your h&r 10ga threaded for a choke tube? I have a 24" h&r 10ga with a screw in cylinder choke. I use it to launch 740g HB slugs that I cast. I am curious if you have a "choked" gun.

    I like your design, in my mind, keeping the slug on the short side is a good thing.

    BB

  20. #20
    I'm afraid its not .. its the 24" fully open cylinder barrel. I think it's a Slugster or something like that. It's very thick walled. (no rifling)

    I haven't done any real testing yet, but i was worried the short stubbyness would make it tumble. (I was happy with the round ball but it wont sit easly in place in the brass and I'm not crimping it) Time will tell.


    Quote Originally Posted by bikerbeans View Post
    Mr.T,

    Is your h&r 10ga threaded for a choke tube? I have a 24" h&r 10ga with a screw in cylinder choke. I use it to launch 740g HB slugs that I cast. I am curious if you have a "choked" gun.

    I like your design, in my mind, keeping the slug on the short side is a good thing.

    BB

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check