ADvertise hereGraf & SonsMidSouth Shooters SupplyTitan Reloading
StainLess Steel MediaLee PrecisionInline FabricationRotoMetals2

Results 1 to 14 of 14

Thread: Finally, a good use for zinc.

  1. #1
    Boolit Master NoAngel's Avatar
    Join Date
    Oct 2014
    Posts
    776

    Finally, a good use for zinc.

    Fill the pot, skim, leave it to cool. Drill and tap for an eye bolt....viola!!! Instant target. Shoot it till it croaks, pick up the pieces, remelt, possibly adding a little more as needed.

    This is an 8" x 3" thick chunk, should hold up to light loads and pistol pretty well. Even if it don't, it's perfectly rebuildable. LOL!!!

    Click image for larger version. 

Name:	wIWOn2I.jpg 
Views:	48 
Size:	40.1 KB 
ID:	205321
    When dealing with islam one should always ask themselves: "What would Leonidas do?"

  2. #2
    Vendor Sponsor

    Smoke4320's Avatar
    Join Date
    Apr 2013
    Location
    Right here ..at least I was a minute ago
    Posts
    3,194
    It will be interesting to see how it holds up

    Please keep us informed
    I carry a Nuke50 because cleaning up the mess is Silly !!

    http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH

    Selling Hi Quality Powdercoating Powder and Sure-Kill deer and cover scents

    PULSAR night vision and thermal dealer !!!
    PM me for a good deal

    I am not crazy my mom had me tested

    Theres a fine line between genius and crazy .. I'm that line
    and depending on the day I might just step over that line !!!

  3. #3
    Boolit Master NoAngel's Avatar
    Join Date
    Oct 2014
    Posts
    776
    As long as it doesn't fragment after a handful of shots it'll be good. The beauty part is, 30 minutes on a turkey fryer and you got a new one.

    Most of our collection buckets are zinc now. Gotta put that garbage to use!
    When dealing with islam one should always ask themselves: "What would Leonidas do?"

  4. #4
    Boolit Master Drm50's Avatar
    Join Date
    Jun 2016
    Location
    SE Ohio
    Posts
    494
    I got a bunch of lead sheeting from a redo of hospital XRay room. I was cutting it up about 2x2'
    to roll up to melt. Got the bright idea to used it fore bullet stops for 22s in basement. Hang sheets
    of it in trap about 1" apart. Bullets shoot through 2-3 of them and stick into the next one. Gathers
    up the bullets automatically. You just have to rotate 1st few that get holed and you are in business.

  5. #5
    Boolit Master

    Join Date
    May 2015
    Location
    plains of colorado
    Posts
    1,330
    one minor flaw, how do you seperate the boolit chunks from the zinc chuncks when you reclaim the lead

  6. #6
    Boolit Master
    Join Date
    Jul 2014
    Location
    Arizona
    Posts
    1,468
    @ rancher1013
    That is easy.
    You melt some known lead, then add the Range scrap to it.
    The Lead should melt fairly quickly If you have the pot at 700 degrees.
    Then skim off anything that doesnt melt right away.
    But dont wait too long, or the Zinc will start to Disolve rather than Melt, similar to Adding antimony to lead.
    That should be a Standard Practice for melting range scrap.
    But most guys that I have seen that save range scrap, just stick it all in a pot, turn up the heat as high as it will go and let it sit for hours, trying to milk out anything that will melt.
    Then they add that stuff to their Good Lead pot, and contaminate the whole bunch.
    I prefer to keep the range scrap seperate, and add tin or antimony as needed to get a good alloy for bullets.
    But basicly start off treating it as Pure lead for my alloys.

  7. #7
    Boolit Master


    Walter Laich's Avatar
    Join Date
    Aug 2005
    Location
    Cypress, Republic of Texas
    Posts
    2,460
    signing up to follow the results of shooting at it
    NRA Life
    USPSA L1314
    SASS Life #48747
    RVN War Games, 2nd Place

  8. #8
    with that much zinc id be making dry pile batteries.. zinc is great for battery anode plates. if you can get the zinc to thin as a foil and using copper foil you can make a battery the length of a paper towel tube using typewriter paper disks saturated with electrolyte between the zinc and copper foils with potentials of 2Kvdc-3Kvdc.. rather like the Clarendon Dry Pile or a zamboni dry pile except using zinc and copper rather than zinc and silver foils and that has been running the Oxford Bell for over 170 years. in theory with modern high quality dielectric construction you could make a battery with potentials in the 100Kvdc range or more...

  9. #9
    Boolit Master NoAngel's Avatar
    Join Date
    Oct 2014
    Posts
    776
    I gotta get some pictures but 9mm, 40 & 45 barely make a dent.
    223 with a 55g fmj stopped about 3/4" deep. This should hold up very well.
    When dealing with islam one should always ask themselves: "What would Leonidas do?"

  10. #10
    Hi NoAngel,

    Seems like great idea and a nice way to set up a bunch of cheap plates for a backyard range.

    Please post some pics when you get a chance. Also maybe some progress reports of how it holds up over time.
    I will be doing some smelting over the weekend and while I have things set up may cast something similar. Great use for the zinc from wheel weight buckets that would otherwise be scrap.

    Also wondering if maybe alloying the zinc with another metal might serve to increase hardness and durability.

    Will do a little research.

  11. #11
    Boolit Master Oklahoma Rebel's Avatar
    Join Date
    Nov 2015
    Location
    outside of Sand Springs, N.E. OK
    Posts
    1,888
    yeah, but then you couldn't sell to the scrapyard as pure zinc,if you ever wanted to. I thought about that earlier. but it seems to be doing ok by itself!
    Norinco SKS
    mosin nagant est 1937
    S&W 15-2 combat masterpiece
    Remington 597 22lr w/30 rnd clip
    12ga NEF single shot
    heritage 22lr/22mag

  12. #12
    Boolit Master NoAngel's Avatar
    Join Date
    Oct 2014
    Posts
    776
    Aluminum (despite its very high melting point) will dissolve in molten zinc.
    You end up with what we call pot metal.
    Problem with that is it makes it more brittle and more difficult to remelt and recast when the target gets damaged.
    When dealing with islam one should always ask themselves: "What would Leonidas do?"

  13. #13
    Boolit Master
    Join Date
    Dec 2009
    Posts
    4,346
    Zinc alloy (Kirksite?) boolits are as tough as FMJ and only 2/3 the weight of a lead boolit thrown by the same mold. This can alloy very high velocity light recoil loads for a large bore firearm. US Army Ordnance once used zinc alloy Boolits to test light vehicle armor plating and gunshields.

  14. #14
    Boolit Master ofitg's Avatar
    Join Date
    Feb 2013
    Posts
    189
    Quote Originally Posted by Multigunner View Post
    Zinc alloy (Kirksite?) boolits are as tough as FMJ and only 2/3 the weight of a lead boolit thrown by the same mold. This can alloy very high velocity light recoil loads for a large bore firearm. US Army Ordnance once used zinc alloy Boolits to test light vehicle armor plating and gunshields.
    Several years ago, zinc-alloy "Zee" bullets were marketed here in the U.S...... as I recall, 9mm, .357 and .45
    "Commerce with all nations, alliance with none, should be our motto."

    - Thomas Jefferson


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check