Batch number 2
Again these are used molds that I have not tried which came with a bunch of stuff I bought. These are being sold for exactly what I have in them.
one Lee 90358 .452 diameter 255 gr SWC dual cavity mold with handles. #90358
One Lee # 90359 .452 diameter 300gr flat nose suitable for 45LC or 454 Casull This is also a dual cavity mold with handles.
These are also $14.00 for the two molds plus Medium USPS priority flat rate shipping of $13.60 for a total of $27.60
Attachment 204921Attachment 204922Attachment 204923
Number 3
Single RCBS Mold
Mold is a 45-255 SWC dual cavity mold without handles. Mold is dirty looks like it should cast good.
Attachment 204926
Attachment 204927
Will take $30.00 shipped
#4
One NEI mold that is a dual cavity mold with one 220gr .429 diameter and one 310gr .429 diameter without handles.
One NEI mold that is a dual cavity 310gr .429 diameter without handles.
I will take $50.00 shipped for these molds
Attachment 204928 Attachment 204929 Attachment 204930 Attachment 204931
#5
LBT Dual cavity without handles. .454 diameter 250gr WFN
This should be a great 45LC or Casull bullet and should size down to .452 if needed with a little effort.
$25.00 shipped
Attachment 204932 Attachment 204933
#6
LBT Dual cavity .358--180 FN mold without handles.
Will take $25.00 shipped
Attachment 204934 Attachment 204935
#7
Custom Rifle Bullet mold
The guy I purchased the mold from couldn't remember the manufacturer but said it did come from a mold maker and not a machine shop.
Bullet weight is 250gr diameter is .3765-.377 aprox
Attachment 204936
Attachment 204937
This molds cost according to what I have been told was in excess of $100.00
I will take $30.00 shipped