Mihec 502-700 Mold

[Redwoode]

I was fortunate to get one of his "JR Editions". My handgun favorite.

[wonderwolf]

I own #166 myself, last 500 S&W I'll ever own because its the best I've ever shot!

[BHill]

I'm in for a two cavity with all the pins. brandonh at vmsi-us dot com


I would also be interested in a pair of the pins mentioned by Mr. Ross previously if possible.

[maxreloader]

I would also be interested in a pair of the pins mentioned by Mr. Ross previously if possible.

I was going to ask about this but didnt want to be a pain...lol... but since it was asked, I also would be interested if possible.

[Gunslinger1911]

Now I gotta decide between this or the ~420hp being discussed. Or both.

I also have one of the JR editions, #71. Certainly gets every body's attention when it goes off.

[Echd]

Excited to see this one get ready. I've wanted one for years!

Maybe I'll buy another 500 to celebrate when it gets here.

[DukeInFlorida]

Still waiting for Mihec to reply about the special pins.
I have added you to the list.

I'm in for a two cavity with all the pins. brandonh at vmsi-us dot com


I would also be interested in a pair of the pins mentioned by Mr. Ross previously if possible.

[BHill]

Thank you Sir.

As an aside I have started a thread about these boolits or very similar boolits and stability on the link below.

http://castboolits.gunloads.com/show...understanding)

Look forward to reading your thoughts.

[JohnSmiles]

Hey guys, long time no see!
I have not been here in quite a while, but this buy sure got my attention.
While I have NO idea what I would do with a 700 gr mold, if you actually start a group buy for a 500 gr(or maybe even a 600 gr) version, please let me know.

[RT4406]

Good evening, I am number 10 on the list and I would also be interested in a set of the "John Ross" pins if they become available. thank you. SR

[Electric88]

I would also like a set of the "John Ross" pins, if it becomes an available option. Thanks!

[readr1]

WTH, if they become an option I'll try a single set of the 1" pins too.

[Mark2215]

Me too!

[Echd]

If it pans out I will also take a set if 1" pins.

[chrisgo]

I would like the 2 cavity mold also, along with the optional pins if available.
Chris G.
nuthinbutdust at yahoo dot com.

[MiHec]

OK. I will make longer (one inch) pinns, too.
But we must hit 30 molds at least...

[Redwoode]

I signed up for 2) with 20) total required for production. If now 30) and a longer wait please change me to 1).

[John Ross]

OK. I will make longer (one inch) pinns, too.
But we must hit 30 molds at least...

Does the smiley mean this is a joke...?

And to be clear, the 1" pins need to be round only, not penta, and with a rounded tip .210" diameter, not a sharp point. Here's a drawing of a shorter (.800" long) pin that looks similar to what I want:


JR

[lup]

Please update my order to include all of the available pin designs including the long 1 inch round pins.

Sent from my SM-N950U1 using Tapatalk

[maxreloader]

Just so we are all on the same page here... if we make it to 30 then everyone will also receive a set of the John Ross pins correct? The reason I am asking is that I mentioned the group buy to a few range buddies and I may have to convince them to sign up to get IN on this. Miha is a Get the job DONE kinda guy!