I sell two different setups.
Setup #1 - $125 shipped
This is a very compact setup.
Designed to control 1 device.
Basically it is horizontal.
Setup #2 - $165 shipped - these are currently build to order
This is designed for to control multiple device but not at the same time. You can only control 1 item at a time. This unit has a plug so you can leave your probe in one device and have another probe in another.
It will take the standard thermocouple with plug that Auber sells.
It will have a mounted outlet for thermocouple connection.
It will come with 2 4 inch thermocouples with plugs.
This is a special order unit and will take additional time to build.
Now the specs on the units
- Multi voltage - They are designed to be worldwide. They ship setup with US 120v connectors. If you want to run something other then 120v then you cut the plugs and install the correct ones.
- 15 amp rated - They have a 25 amp SSR but the wiring is limited to 15 amps as most standard 120v outlets are rated for 15 amps
- 500c rated - The probes unless specified differently are rated to 500C (900F)
- 4 inch probe length - The standard length is 4 inches. Longer lengths are available but will have to be special ordered and cost more.
- Standard no BS warranty - In the event that you have a issue, please contact me. Failures do happen rarely but I have always taken care of the issue. Please be reasonable and don't expect me to warranty a item that is a couple years old or that has been mistreated. No, I will not replace the PID controller because you spilled hot lead on it. Yes that has been asked.
This post was updated on 1/24/2020.
The preferred payment method is PayPal.
Please DO NOT USE Friends and Family. I will pay the fee. It is easier for me to track and ship the orders this way.
Also please verify your PP address is correct as I only ship to the address provided by PayPal.
Instructions- http://goo.gl/uOUDyX
Probe mounting ideas - http://castboolits.gunloads.com/show...nting-pictures
Do not send me a message concerning temp swing unless you have run auto-tune