Wtb: 35 Remington brass

[jebb45]

wanting to buy any 35 Remington brass, wanting once fired.........need for new project. would like about 200 rounds...........

[Johnny_Cyclone]

35 Remington.. hummm... check with Grumpa via PM if you haven't already. He's a site Vendor Sponsor

35 Remington Brass from 308 1x fired Mil brass:
http://castboolits.gunloads.com/show...ired-Mil-brass

Post #56 is pretty informative



Anyway, just a friendly FYI if you hadn't checked.

[bstone5]

The converted brass from Grumpa is very good high quality. I have a hundred and they work very well in a single shot H&R Handi rifle. Have reloaded several times without any problems. Shot powder coated cast with a gas check plus some paper patched cast lead bullets. The paper patch work well but usually shot the powder coated for plinking rounds. I anneal the brass every third reload to save the necks..
Very good case the wall thickness is thicker then the factory brass so be careful with high capacity powder charges.

[reed1911]

Agreed, Grumpa's brass is great. If you need proper headstamp brass I have some, 58.00 per 100 plus shipping.

[Dadswickedammo]

I have a bag of 100% once fired un sure of count headed out for the day will get back to you later

[edp2k]

I have 35 pieces of once fired 35 Rem, all Hornady, same lot, SS pin tumbled, squeaky clean inside and out
$20 shipped.
PM sent.

[GRUMPA]

You guys wanna know something?

With as indestructable as those cases are, they sure don't move very fast. Those have been in circulation for around 4yrs now, and nobody has ever written me back telling me a case actually wore out.