Will this make soft lead for muzzloader bullets? I know the pipe is but I'm not sure what the joint is made from.
Sent from my SM-G900V using Tapatalk
Will this make soft lead for muzzloader bullets? I know the pipe is but I'm not sure what the joint is made from.
Sent from my SM-G900V using Tapatalk
That is a wiped solder joint from plumbing. My samples usually test in the area of 30% tin. It would be good to melt the solder off the joints as it has a lower melt temp than pure lead. Keep it and clean up a nice sized batch and then add a little at a time if you need to, for well filled out molds. If you leave a little on the joint it will be fine with the final melt when turning into ingots. It is always nice to have a little tin rich alloy on hand when needed. Good find, keep looking for more. Dusty
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |