Ruff service bulb broke - tried a LED bulb

[pmer]

So far so good, I've bumped it a few times and it is still going. I was at the grocery store and suddenly remembered I needed a bulb for the trouble light. The store didn't have ruff service bulbs but had some LED bulbs. I figured its worth a try because of the way LEDs are soldered in place.

Haven't dropped it yet, I suppose that's the final test.

[Bookworm]

At Christmas one year I received an LED head that screwed into my trouble light, replacing the bulb and the big metal guard (or plastic, for the newer ones). The head is flat, and throws the light one way, which solves the squinting problem. It works like a champ, and hasn't failed yet, even with the rough treatment it gets. (they are called 'drop lights' for a reason, right ?)


It came from sears, I believe.

[starmac]

You guys still use corded trouble lights. wow. lol

[Finster101]

Decent rechargeable led lights off the tool trucks are somewhere in the $100.00 range. Worth every penny when you are stuffed up under a dash trying to get tiny screws out to change an actuator.

[10x]

LED headlamp is the ticket.

[Bookworm]

You guys still use corded trouble lights. wow. lol

Corded trouble light, yes.

I use air impacts and ratchets.

And I have 5 times as many SAE tools as I have metric.

[Smoke4320]

but how many metric adjustable wrenches do you have ?
and a real mechanic has at least 2 LEFT hand metric adjustable spanners

[6bg6ga]

Left hand what? LOL

[Grmps]

but how many metric adjustable wrenches do you have ?
and a real mechanic has at least 2 LEFT hand metric adjustable spanners

I thought they only sold those in OZ

[starmac]

I put off buying cordless impacts for years, except for the 1/4 and 3/8. I finally bought the 1/2 and 3/4 last summer and never drag out an air hose unless I need the 1 inch. They have 7oo and 760 ft pounds torque in forward and over 100 hundred in reverse, I was amazed at what they were capable of.

[starnbar]

Yeah my #3 son uses a portable elec impact and I really didn't think a lot of em until I borrowed his 3/4 to take off some truck tires worked like a charm and like the man said they have got plenty of torque.

[Grmps]

I used to carry the Makita 18V LXT 6 pc combo plus 1/2" impact wrench, led flashlight and a few spare batteries and it served me well on many occasions

[woodbutcher]

Yesterday,I got a cordless drill at WalMart when I took a friend to do some shopping.I needed some ATF,and when I turned into the oil asile MY MY There lay a PAIR of 20 dollar bills.So I checked out the tool asile.Had a little one on sale for$18.73.Hyper Tough brand.Tried it today,and it works pretty good.Will see about long term.It`s an 18 volt.3/8th VS type.Hand tighten chuck.Should do ok for my needs.
Good luck.Have fun.Be safe.
Leo

[MaryB]

My 1/2" inch cordless impact gets used a LOT, I have swapped tires with it, used it to drive 6" lag screws, did some tower assembly with it...

[MT Gianni]

I used a Dewalt 1/2" 18V for work, breaking down gas meters and vic pipe couplings. I would get 3-4 years out of one with 7-8 months annual usage. The rest of the year it sat in a truck bin exposed to winter temps. They would easily hit the 125 ft lbs of torque to to change a tire.

[Finster101]

Corded trouble light, yes.

I use air impacts and ratchets.

And I have 5 times as many SAE tools as I have metric.

Dinosaur !

[frkelly74]

I got one of the 1/4" impact drivers from home depot. It is a Ridgid 18 volt battery outfit. It will drive 6" screws into solid wood when it is set on #3 easily. I have not needed to try it on anything automotive yet but may very soon. The el cheapo 1/2" impact driver I got from Auto Zone has worked well for me when I need to take wheels off or remove a pully.

[pmer]

I'm a dinosaur too. Corded drop lights and air impacts. But I can see the usefulness of a cordless impact wrench. You guys are probably going to get me to spend money! Again..

[Goatwhiskers]

Those metric adjustable spanners down in OZ have the head on the opposite end of the handle from ours. GW

[bedbugbilly]

I had a corded trouble light that I use all the time out in the shop before we moved - yea, I'm a dinosaur too. LOL When we moved in to town, as I sorted stuff out I would it up and when we had a garage sale, put it out - put a $1 on it. Guess what was still there. Since then, I've tried giving it away thinking someone could use it - no takers. It is still out in the garage. Next step - Goodwill.

I'll admit the new lights are certainly somethng. When we were fine the condo up that we moved in to, we changed all the bulbs to LED - what a difference! When I sorted through my tools, all I could think of is how old some of them are. A wrench will always be a wrench and a hammer a hammer, but there are certainly a lot o improved tools out there that make the work easier. I remember when cordless drills came out and I switched to them - no more cords to worry about and keyless chucks were a nice touch too. I don't have impact wrenches but I can only imagine how much easier it is to not have to drag that hose around.