Last edited by MAGA; 08-30-2017 at 10:18 PM.
I think the boolits would fall through. Home Depot and Lowes carries 1/4 hardware cloth/mesh. or go to Bed bath and beyond and buy 6x9 mesh office trays
Powder-Coated 6-Inch x 9-Inch Mesh Drawer Organizer in Silver
https://www.bedbathandbeyond.com/sto...192?poc=229937
work great and you small boolits won't fall through
those would work to separate the bb's from the bullets.
They should fit side by side. If you have a toaster/ non-convection oven the heat source may not be adequate to evenly bake 2 pans at a time, convection ovens have a circulating fan that distributes the heat evenly.Make sure you test the oven temperature setting with an oven thermometer set in the middle of the shelf you will be baking on, adjust the oven temperature guage until the oven thermometer reaches 400*, the note where the oven is set to acheive that temperture, mark it down for future referance.
That looks like something I would cook jalapeņo poppers on, I would go with the suggested mesh trays listed above. Personally I still use a small cookie sheet and non stick foil standing each boolit one by one but will soon be buying mesh trays of my own. I like the idea of the ease this has brought to the process.
The only thing we are afraid of is our own abilities once you get to the point where you don't care about your abilities they become limitless
I made my own:
https://www.flickr.com/photos/157294...in/dateposted/
made out of these from WalMart (one tray per screen):
https://www.flickr.com/photos/157294...in/dateposted/
NRA Life
USPSA L1314
SASS Life 48747
RVN/Cambodia War Games, 2nd Place
I used the 1/2 sheet aluminum cookie sheet at walmart. Then put a silicon sheet on top, this has worked well for several months for hi-tek
Sent from my SM-G920V using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |