https://www.youtube.com/watch?v=F8BV-t2g_MY
this is what i got done on my pneumatic swage press so far.. it got the stand done today and just got to clean everything up and paint it and put on my logo.. im thinking "Bullet Farmer Industries" lol.. yea, like the bullet farmer off mad mad fury road.. im not that crazy yet though.. but i still got to mount my control plate where the control lever will go for up and down control. also still have to mount the ejector cylinder and the shear lever for removing the trim material off the trimmed jacket.. if i can get everything to work like i want it to it i can trim hundreds an hour, seat hundreds of cores and hour, and point form hundreds and hour.. basically a hand feed pneumatic production press. originally i thought of 3 cylinder setup where on the trimming it would trim, remove trimmed material, and eject the trimmed jacket all in one actuation. we will see how that goes though. i might just use 2 cylinders and use a lever actuated shear plate the remove the trimmed material b4 the ejection cylinder is actuated..