I got a custom mold as a present, so I'm selling my Seaco mold. It's a 220 grain, two cavity, gas checked mold. Always used non-chlorinated brake cleaner to clean it, never used mold release or anything else, always pre-heated using a ceramic hot plate. I run these bullets through a .411 sizer and they come out nice and shiny, (Lyman No. 2). I've made about 2K bullets with this mold. This mold goes for 110.00 on Midway USA. I'm selling it for 1/2 of that, 55.00. USPS priority mail anywhere in the lower 48 for 5.00.