Hello folks. Is there anyone here that can tell me if the large frame lightning is wider/thicker then the Med one? I'm talking about the thickness of the lower tang part that goes up in the frame. Thanks for the help.
Roy
Hooker53
Hello folks. Is there anyone here that can tell me if the large frame lightning is wider/thicker then the Med one? I'm talking about the thickness of the lower tang part that goes up in the frame. Thanks for the help.
Roy
Hooker53
Sorry all I have are the small and medium frames. You might try the patent drawings on line.
KCSO. I will do a search and see if I can find them. I fig I would be shooting into the air to find a drawing on them but I will have a go of it. I have the frame and have found a lower tang/trigger group but the kind gent that has it don't know if it's a Med or Lrg. He was nice enough to measure two diamentions on it for me. One which is the width of the part but the other was an inch short. I'm hoping he just dropped that inch and the one he has is a Med. Thanks for the idea.
Roy
Hooker53
Numrich maybe have the drawings ,might be worth an email to them.
Hello BYB. Yes, I've seen the drawings for the parts but never Fig they would have them with all the dimensions on them. I will send them an email. Thanks.
Roy
Hooker53
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |