StainLess Steel MediaTitan ReloadingRotoMetals2Repackbox
Lee PrecisionInline FabricationMidSouth Shooters SupplyWideners
Graf & Sons
Page 2 of 2 FirstFirst 12
Results 21 to 23 of 23

Thread: shot shells for 480 Ruger

  1. #21
    Boolit Master
    Join Date
    Jan 2006
    Missouri Ozarks
    1) The maximum distance a snake can strike is 1/2 its body length To be a threat at a distance of 7-10 feet the snake would have needed to be 14-20 feet long.

    2) It is illegal to kill snakes, even copperheads, in Missouri.

  2. #22
    Boolit Mold
    Join Date
    May 2016
    I tried the 5-in-1 brass using 6.5 grains of unique, topped with an overpowder card, topped with as much 7.5 shot as I could fill the case with, topped with an overshot card. Topped that off with some Elmer's glue to hold everything in. Tried them in a single shot 45 LC/410 derringer today. Only tried 5 rounds, all of them worked fine. I only tested for function and didn't really check for pattern or penetration. It seems to shoot about a foot low at 10 feet.

    The 5-in-1 brass already has an oversized flash hole of approximately 9/64 diameter. The cases are a good bit longer than 45 LC cases. The 5-in-1 cases are 1.55" vs 1.28" for 45 colt. They are obviously not as long as a 410 shell. The diameter (.43" at the mouth) is also smaller than either a 45 LC or 410 shell, but that didn't appear to matter for function. There is some noticeable expansion of a few thousandths at the case mouth after firing.

    Overall, I'm pleased with this so far and will experiment further. Just glad I found a use for this 5-in-1 brass.

  3. #23
    Boolit Bub
    Join Date
    Sep 2011
    Hot Springs, Arkansas
    How does the spread compare from a round that uses a plastic wadding/cup to one that does not, from a rifled pistol barrel? I'm wondering what will work best in my 7.5" Super Redhawk.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check