Titan ReloadingMidSouth Shooters SupplyInline FabricationLee Precision
StainLess Steel MediaRotoMetals2Wisconsin TriggerGraf & Sons

Donate Now Goal amount for this year: 6000 USD, Received: 5345 USD (89%)
WE HAVE REACHED OUR GOAL! THANK YOU TO EVERYONE WHO HELPED CONTRIBUTE AND KEEP US GOING!
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206
****Due to overwhelming e-mails, I will be very slow in updating this list. Please bear with me!****


Results 1 to 11 of 11

Thread: Lee Slugs - Getting Started

  1. #1
    Boolit Master

    Join Date
    Apr 2012
    Location
    State of Denial
    Posts
    1,893

    Lee Slugs - Getting Started

    Ordered the Lee 1-ouncer yesterday, and will be dusting off a Mec press that probably hasn't seen the light of day in 25 years. Metallic is old hat; shotshell is mystic voodoo.

    Bear in mind I'm primarily after RIFLED barrel info, but will probably be lobbing them from ungrooved sewer pipe as well.

    What I've gleaned so far:

    1. 7/8th ounce wad cups are probably the desired vessel to stage the warhead at the right height for the star crimp.

    2. You WANT the wad to jam into the drive key for a rifled barrel, but possibly not for a smoothbore. In either case, you want the wad to let go of the projectile easily. Seems like base wads are the order of the day for smoothbore, but not for rifled and that some manner of goo to help separation may be desired.

    3. It would seem these things want to be soft. I scrounge and melt recovered slugs that test out around 40-1 / 8BHN. Figure to use that, maybe add some tin if the mold doesn't behave. I have a PID on the pot - how hot does this puppy need to run?

    4. I have access to once-fired Federal 2 3/4 buckshot hulls. Anybody know what they equate to in the recipe books? Do they equate to ANYTHING? The Flite Control wad they come packed with is a rather different animal.

    5. Back to the drive key. . .seems like you would want to deliberately line that up with the collapsible bits of the wad piston somehow. Any thoughts on that?

    How am I doing so far? Any thoughts and pointers before I dive in the pool?
    WWJMBD?

    Buried in molds until covered with mold.

  2. #2
    Boolit Master
    Join Date
    Nov 2014
    Location
    Somewhere else
    Posts
    410
    Your over thinking this whole thing.

  3. #3
    Boolit Bub MAGA's Avatar
    Join Date
    Jul 2017
    Location
    NC
    Posts
    21
    Great thread
    Interested as well!

  4. #4
    Boolit Man
    Join Date
    Feb 2017
    Location
    Ely MN. (bwcaw)
    Posts
    100
    re #4 how many hulls do you have? id probably focus on a recipe for a hull you have a lot of.
    I like to use the same hulls as im using for my grouse/trap loads, i used the cracked ones i cut them on a drill press and roll crimp.

  5. #5
    Boolit Master
    Join Date
    Nov 2014
    Location
    Somewhere else
    Posts
    410
    First thing you guys have to do is learn to use the "SEARCH" function. Lots of great info buried in this forum.

    http://castboolits.gunloads.com/show...-for-lee-slugs

  6. #6
    Boolit Master

    Join Date
    Apr 2012
    Location
    State of Denial
    Posts
    1,893
    Quote Originally Posted by zymguy View Post
    re #4 how many hulls do you have? id probably focus on a recipe for a hull you have a lot of.
    I like to use the same hulls as im using for my grouse/trap loads, i used the cracked ones i cut them on a drill press and roll crimp.
    We throw 'em away at work after they're fired, so the supply is basically limited by when I stop picking them up. I sliced one open and it's a once-piece, apparently non-tapered body.
    WWJMBD?

    Buried in molds until covered with mold.

  7. #7
    Boolit Master

    Moonie's Avatar
    Join Date
    Apr 2010
    Location
    High Point North Carolina
    Posts
    4,123
    The mold comes with load data, you can look at it now on their website.

    My current favorite load with my 1oz Lee:
    2 3/4" Cheddite Hull Ched209 Hodgdon Clays 21.0gr PT1205 1oz Lee Key Slug Pressure 9500 1300fps with a roll crimp.
    Last edited by Moonie; 08-15-2017 at 07:48 PM.

  8. #8
    Boolit Master MOA's Avatar
    Join Date
    Feb 2012
    Location
    Mobile, Alabama
    Posts
    194







  9. #9
    Boolit Master Huntsman's Avatar
    Join Date
    Sep 2007
    Location
    Morinville, Alberta
    Posts
    300
    Quote Originally Posted by Retumbo View Post
    First thing you guys have to do is learn to use the "SEARCH" function. Lots of great info buried in this forum.

    http://castboolits.gunloads.com/show...-for-lee-slugs
    My favourite;

    http://castboolits.gunloads.com/show...z-load-success!!

  10. #10
    Boolit Master



    curator's Avatar
    Join Date
    Mar 2006
    Location
    Fort Myers, Florida
    Posts
    1,147
    Casting hot and keeping the base-pin hot is important with the Lee slug moulds. I use pure lead with about 1/2% tin added--just enough to get better mould fill-out. You may find that the addition of a 20 gage over powder wad in the bottom of the shot cup helps with accuracy. Look at your fired wad columns fr signs of the cup base being driven up into the slug's hollow base. The Lee "key" mostly prevents this but not always. One or two hard card wads under the slug absolutely prevents this.

  11. #11
    Boolit Man
    Join Date
    Sep 2007
    Location
    Missouri
    Posts
    120
    My experience was with the 1 oz. I used ww and range scrap cast hot they filled out great. I used win aa hulls. Claybuster wads didn't work well for me win brand wads shot better . a hard card under the slug in the shotcup is your friend . the herco load in the Lee data was brutal. I ended up using a red dot load out of the Lyman shotshell book for a 1 1-8 trap load recoil was a lot kinder and deer couldn't tell the difference. On a good day I was getting 100 yard 2 in groups out of an hr ultra slug hunter . smooth bore shot pie plate size at 50 yds

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check