Load DataInline FabricationRepackboxRotoMetals2
Lee PrecisionTitan ReloadingMidSouth Shooters SupplyWideners
Reloading Everything
Results 1 to 15 of 15

Thread: Alcan 7

  1. #1
    Banned



    Join Date
    Nov 2009
    Location
    Kansas
    Posts
    7,068

    Alcan 7

    Among the other stuff I got when we cleared out my folks and moved them to an assisted living place is a big keg of Alcan #7. I've been shooting up another keg he had of Alcan #5 which I have been using Red Dot data for and it's been OK, pretty good actually in .38 Special and .45 Colt.

    This Alcan 7 has more loading data in my old manuals than did the Alcan 5. Seemed like good stuff in magnum hand gun loads, seems to burn slower than Unique but faster than Blue Dot.

    I loaded up some today using some gas checked 158 grain SWCs and 9 grains of this Alcan #7 in a Blackhawk I have that has given mediocre accuracy with most things I've tried in it. Today's groupings were the best I've ever gotten from it. This is the first time using this powder. Fortunately, I have a lot of it, but when it's gone, it's gone. Anyone used Alcan #7 before? It was apparently designed for heavy field loads in the 12 gauge, but I have a Lyman shotgun manual from he '70s and there is very little data in it for the Alcan powders.

  2. #2
    Boolit Master kywoodwrkr's Avatar
    Join Date
    Mar 2005
    Location
    Hodgenville, KY-Lincolns Birthplace
    Posts
    980
    Tried to backout after reading you had 'older' manuals.
    Old sierra was what I was going to suggest to others wondering.

  3. #3
    Boolit Master murf205's Avatar
    Join Date
    Sep 2011
    Location
    Dead center of Alabama
    Posts
    2,366
    You are right about the burn rate, its between Unique and Blue Dot. Its good stuff, just doesn't meter quite as well as I would have liked for it to but it gave good velocities in 44 mag with 250 swc boolits and 357 mag as well. Keep it cool and dark in low humidity and it'll last a loooong time. I believe the Speer #9 manual has data for it. I also used Alcan #8 in my 44 mag and the velocities were really fast, but it is slower burning than #7. Fortunate for you, it's good stuff, enjoy.
    IT AINT what ya shoot--its how ya shoot it. NONE of us are as smart as ALL of us!

  4. #4
    Banned



    Join Date
    Nov 2009
    Location
    Kansas
    Posts
    7,068
    Yeah, it seems to be good in the .357. At least there was a decent amount of data for it, the AL-5 data was scarce.

  5. #5
    Boolit Master murf205's Avatar
    Join Date
    Sep 2011
    Location
    Dead center of Alabama
    Posts
    2,366
    Attachment 201200Maybe this will help. This burn rate chart features some old powders like Alcan AL 7 that are no longer manufactured. Might need to magnify it, I had to print it and enlarge.
    IT AINT what ya shoot--its how ya shoot it. NONE of us are as smart as ALL of us!

  6. #6
    Boolit Master
    farmerjim's Avatar
    Join Date
    Nov 2012
    Location
    St. Francisville, Louisiana
    Posts
    1,925
    Quote Originally Posted by murf205 View Post
    Attachment 201200Maybe this will help. This burn rate chart features some old powders like Alcan AL 7 that are no longer manufactured. Might need to magnify it, I had to print it and enlarge.
    The file is only about 9 K bites. When increased in size it can not be read. I would like a copy. Please re post with more pixels.
    There is no difference between communism and socialism, except in the means of achieving the same ultimate end: communism proposes to enslave men by force, socialism—by vote. It is merely the difference between murder and suicide. Ayn Rand

  7. #7
    Banned



    Join Date
    Nov 2009
    Location
    Kansas
    Posts
    7,068
    Thanks for mentioning Speer #9. As it turns out, I had it on the shelf (I pick up old manuals when I find them cheap enough at gun shows). I've had that manual for years, but it was never a "go-to" manual. After thumbing through it, I'm not sure why. Lots of good data in there and they have some for cast designs they didn't sell.

    I think I have my go to powder for the .357 Magnum for a while. Haven't loaded any .44 Magnum in a long time, but looks like it'll be good for that too. Looking at this Speer manual, it seems it'll do anything velocity wise that 2400 will.

  8. #8
    Boolit Master Guesser's Avatar
    Join Date
    May 2009
    Location
    North Central Montana; across the wide Missouri
    Posts
    2,069
    Back in the 70's I used a lot of AL-7 in 357 Magnum, both revolver and carbine.

  9. #9
    Boolit Master
    Join Date
    Apr 2014
    Posts
    533
    Another good one is AL-8 down to my last can.

  10. #10
    Boolit Master murf205's Avatar
    Join Date
    Sep 2011
    Location
    Dead center of Alabama
    Posts
    2,366
    Attachment 201346AL-8 was the hot stuff in the 70's. I shot a bunch of it with 240 gr hp bullets. Made a big hit on snowshoe rabbits in Alaska my first trip. (Those snowshoes are pretty tuff to eat). I head shot a few with an 8 3/8" 29 S&W when I had 1976 eyes! Here is the chart at 150% enlarged, if I go larger on my scanner, it gets off the page. I found this at Castpics burn rate of common powders.
    Last edited by murf205; 08-07-2017 at 08:32 PM.
    IT AINT what ya shoot--its how ya shoot it. NONE of us are as smart as ALL of us!

  11. #11
    Boolit Master oldhenry's Avatar
    Join Date
    Mar 2016
    Location
    Albany, GA
    Posts
    902
    Back in the late '60s AL-7 was our favorite 20 gauge powder. We also used AL-8 for the 1 1/8 oz. loads.

    In the 90's I lucked up & bought the remaining stock of AL-5, AL-7 & AL-8 from a rural gun shop @ $2.50/can (1/2 lb.). I have more experience with the AL-8 which was great with heavy bullets in the .357 Mag. Unfortunately the AL-8 is gone now, but I have about 1200 loaded rounds.

    My Lyman Pistol & Revolver Handbook (8th printing 1/92) shows AL-7 loads for .38 Spec., .45ACP & .45 Colt. If you're interested in any, let me know.

    Henry

  12. #12
    Boolit Master
    Join Date
    Aug 2009
    Location
    gardners pa.
    Posts
    3,443
    we used a lot of al-7 in .30 carbine rifle loads.

  13. #13
    Moderator Emeritus


    JonB_in_Glencoe's Avatar
    Join Date
    Mar 2010
    Location
    Land of 10,000 Lakes
    Posts
    15,832
    Quote Originally Posted by richhodg66 View Post
    Among the other stuff I got when we cleared out my folks and moved them to an assisted living place is a big keg of Alcan #7. I've been shooting up another keg he had of Alcan #5 which I have been using Red Dot data for and it's been OK, pretty good actually in .38 Special and .45 Colt.

    This Alcan 7 has more loading data in my old manuals than did the Alcan 5. Seemed like good stuff in magnum hand gun loads, seems to burn slower than Unique but faster than Blue Dot.

    I loaded up some today using some gas checked 158 grain SWCs and 9 grains of this Alcan #7 in a Blackhawk I have that has given mediocre accuracy with most things I've tried in it. Today's groupings were the best I've ever gotten from it. This is the first time using this powder. Fortunately, I have a lot of it, but when it's gone, it's gone. Anyone used Alcan #7 before? It was apparently designed for heavy field loads in the 12 gauge, but I have a Lyman shotgun manual from he '70s and there is very little data in it for the Alcan powders.
    I was just doing some extrapolating of AL7 data for 41 Mag, just last month.
    http://www.artfulbullet.com/index.ph...nd-41mag.2726/
    I haven't gotten back to that project, but I will when time allows.
    ~~~~~~~~~~~~~~
    “If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
    ― The Dalai Lama, Seattle Times, May 2001

  14. #14
    Boolit Grand Master


    Larry Gibson's Avatar
    Join Date
    Jul 2005
    Location
    Lake Havasu City, Arizona
    Posts
    21,299
    Quote Originally Posted by bob208 View Post
    we used a lot of al-7 in .30 carbine rifle loads.
    I did too, back in the late '60s with Speer 100 gr plinkers and the 311410.
    Larry Gibson

    “Deficient observation is merely a form of ignorance and responsible for the many morbid notions and foolish ideas prevailing.”
    ― Nikola Tesla

  15. #15
    Boolit Master on Heaven’s Range
    onceabull's Avatar
    Join Date
    Mar 2005
    Posts
    1,278
    I didn't buy Speer's #9,after some experience with data in their #8 Edition( that's the manual that later ownership ,post Statute of Limitations time limit,acknowledged that various published Maximum loads were "extrapolations" rather than actual firing results...If you happen to be able to compare data in their #10 Vs allsamee in # 8,i suspect. "bemused" will apply...!!! I'd surmise that 6.0 gr Of unique or 12.0 gr. of 2400 under a 158 bullet would be tough on the mechanics of a K-frame S&W...!!!Onceabull
    "The Eagle is no flycatcher"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check