these are some 130gr .308 varmint bullets i swaged with my home made die set ( i got a few hundred of them done waiting for the polishing step).. these are as cheap as i can make.. i got everything from local scrap dealer. i got a piece of 0.025inch thick copper roofing material for $12.00 that gave me a few hundred jackets.. the lead is soft lead diving weights i got from same dealer that i melted down and cast the cores out of.. i figure i got probably $5-$8 per 100 bullets, compare that to a box of 100 varmint 130gr bought commercially at $30.. they seem to do good with 2015 LC military brass, Federal #210 LRP, and 47gr of H414, can print a group at 50m around 3/8inch when i tested them. still need to takem out to 100m and beyond, being i live in a wooded area and in an area with many hills ill have to find a place that i can get 300m-400m. but that is central Alabama, what did i expect..