It was never their main business and I guess they were making scads of money doing more military pursuits...
I decided to take a page out of jmorris's book and MacGyver a hookup between the GSI tool head and a Mr. Bullet Feeder collator. I was all set to fight to the death with it. No need. The output from the MBF dropper with the micro switch in it is 5'8's OD and the input to the GSI's aluminum casting that used to hold their micro switch is also 5/8 OD. I could even use a 3 inch section of spring that the bullets ride through but I'm going to source up something that will make it one rigid unit.
Folks seem to be happy with the versatility of the MBF collator. I have all the GSI and MBF bits to feed 45 and 38/9mm. Hopefully I'll be able to actually change my 650 around every now and then to run a different caliber.
|
   
   
|
|
Reply With Quote
