StainLess Steel MediaInline FabricationTitan ReloadingRotoMetals2
Graf & SonsMidSouth Shooters SupplyLee PrecisionADvertise here

Results 1 to 8 of 8

Thread: WTS: Magazine Lots , 300 WM brass, Scale lot

  1. #1
    Boolit Master wonderwolf's Avatar
    Join Date
    Apr 2007
    Posts
    1,451

    WTS: Magazine Lots , 300 WM brass, Scale lot

    Selling some more excess as I'm waiting the shop to call and tell me what the butchers bill is for my new transmission. I will take USPS MO or friends and family paypal, due to my work schedule and getting to the bank waiting to clear etc I will not be taking personal checks for these lots at this time.

    First "I'll take it" rules apply followed by PM or email.

    Lot #1 QTY 3 pro mag enfield magazines, they are in bags marked for the #1 and #4 but appear to have been swapped as all mags have same latch stop on the spine. So its safe to say the bags are not correct for all 3, I'm leaning towards these being for the no 1 mk2 but I don't have a gun to confirm on. Some appear to have been loaded or perhaps used lightly at some point so I'm calling them used. [$50 shipped for all 3 mags SPF
    http://s40.photobucket.com/user/wond...9.jpg.html?o=0


    Lot # 2 QTY 3 AR 7.62x39 mags, I'm assuming 30 rounders here. 2 are bushmaster and is "C products". I got these before C products was bought out so I know the C products was made before their quality started going downhill. $50 shipped for all 3 mags

    http://s40.photobucket.com/user/wond...0.jpg.html?o=2

    Lot #3 QTY 7 grab bag pistol mag, Are all aftermarket so far as I can tell, The 4 pictured left are S&W 6904 13 round mags, The next is a S&W "high cap" as per handwritten label, though the printed label at top shows it could be for a 59 series gun. "SW59915" , next is a 9mm beretta magazine of some sort says taurus on it, then a mag marked "sig" on the label. 7 mags total $55 shipped SPF

    http://s40.photobucket.com/user/wond...1.jpg.html?o=3


    Lot #4 Qty 3 mags, here we have a Baby Desert Eagle 10 round 9mm magazine, Then a 10 round EAA witness poly 9mm mag, and then a new out of plastic stainless mecgar taurus 92/99 15 round 9mm mag. 3 mags total $45 Shipped

    http://s40.photobucket.com/user/wond...3.jpg.html?o=1

    Lot #5- 300 winchester magnum brass, 308 pcs unknown # of loadings. These would be good for somebody swagging 50bmg or other brass projects, will ship in a medium flat rate box. $42 shipped SPF
    (no picture)

    Lot #6 lot of 4 scales, two are RCBS 5-0-5 marked scales are for parts/repair only. I don't have the time or the need to get them to zero out, They came with a lot of other reloading stuff from an estate and the family had boxed everything up not thinking things were matched up to one another. The older RCBS scale (comes with box in background) is one I used for a long time. It has a wondering zero, or it perhaps didn't like where my bench was set up at my place 2 years ago. The air system kicking in may have been the cause, not sure but it kept drifting .1 of a grain from time to time on me. the 4th scale is a older undampened redding I used last year along with my 310 tong tool to load 38/357. Has box, label is partially missing works great! just slow is all. All 4 scales $65 shipped SPF

    http://s40.photobucket.com/user/wond...tml?sort=3&o=0

    More to come
    Last edited by wonderwolf; 07-21-2017 at 08:29 PM.
    My firearms project blog

  2. #2
    Boolit Master wonderwolf's Avatar
    Join Date
    Apr 2007
    Posts
    1,451
    Bump, if you don't like the prices feel free to make offers.
    My firearms project blog

  3. #3
    Boolit Man
    Join Date
    Sep 2007
    Location
    Missouri
    Posts
    121
    I'll take the 300 brass. Pm me your paypal address

  4. #4
    Boolit Master



    missionary5155's Avatar
    Join Date
    Feb 2007
    Location
    Back in sunny Arequipa, Peru
    Posts
    5,493
    Greetings
    I will take the Enfield mags and the scales..
    PM follows
    Mike in Peru
    "Come unto Me, all you who labor and are heavy burdened, and I will give you rest." Matthew 11:28
    Home built Matchlock similar to what an early 1600 Colonial soldier might have.

  5. #5
    Boolit Master wonderwolf's Avatar
    Join Date
    Apr 2007
    Posts
    1,451
    Monday Bump
    My firearms project blog

  6. #6
    Boolit Master
    Join Date
    Jan 2006
    Location
    SW Idaho
    Posts
    2,217
    Be happy Wolfman, you don't want to know what an auto trans for my old Jaguar cost last year. Think half of what a Cape Buffalo hunt in Zimbabwe runs these days...

    You still doing the anodized 80% sets these days?

    Rich

  7. #7
    Boolit Master wonderwolf's Avatar
    Join Date
    Apr 2007
    Posts
    1,451
    No more 80%...the firm that was doing the anodizing didn't want to play ball anymore, I think they had a takeover in management.
    My firearms project blog

  8. #8
    Boolit Master
    Join Date
    Mar 2005
    Location
    Hodgenville, KY-Lincolns Birthplace
    Posts
    714
    Oh Duuh!
    wonderwolf, just realized I hadn't posted I'd take #3.
    Just making it offical.
    Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check