Titan ReloadingMidSouth Shooters SupplyRotoMetals2StainLess Steel Media
Inline FabricationWisconsin TriggerLee PrecisionGraf & Sons

Results 1 to 12 of 12

Thread: Full custom leather rifle cartridge belt, knife sheath and cross draw holster

  1. #1
    Boolit Master


    Tnfalconer's Avatar
    Join Date
    Jul 2016
    Location
    Great falls Montana
    Posts
    177

    Full custom leather rifle cartridge belt, knife sheath and cross draw holster

    Hello again guys, this is a rig that I made for myself to begin with. A customer of mine decided he wanted it so I agreed to sell it to him and started on a new one for myself and now he has changed his mind wanting one in natural leather versus the British tan and red. This belt rig fits a 36" waste or larger, up to about 44". It is completely tooled on every surface.It is lined with red butter soft suede and should last a lifetime. Bullet loops are hardened suede so that they grip the bullet and won't let them slip. It was designed after a custom rig from the 1800s. Cartridge loops will hold 45-70 to 50-90 cartridges, 21 of them. It features a "Cameo" of three shots on the right front hip for quick access and the rest are around the back. The knife in the sheath is included in the sale. The holster will fit any shorter single action revolver, it was made for the avenging angel 2.5" revolver pictures. It is not included but if someone was interested I would discuss letting it go with the rig. The tooling does feature the letter "B" on the holster and on the buckle frog. I am a custom leather worker and this rig would cost close to 600.00 to have made custom. It has never been worn or used. . I would look at trades for casting pots, loading presses and the like but please be realistic. Thanks for looking. PRICE REDUCED: 300.00 shipped or trade

    *** Will consider trades on casting equipment, cap and ball revolver, muzzle loaders******
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	137 
Size:	70.9 KB 
ID:	199251   Click image for larger version. 

Name:	image.jpg 
Views:	117 
Size:	59.2 KB 
ID:	199252   Click image for larger version. 

Name:	image.jpg 
Views:	120 
Size:	40.0 KB 
ID:	199253   Click image for larger version. 

Name:	image.jpg 
Views:	111 
Size:	36.3 KB 
ID:	199255  
    Last edited by Tnfalconer; 07-11-2017 at 11:52 PM.

  2. #2
    Boolit Master


    Tnfalconer's Avatar
    Join Date
    Jul 2016
    Location
    Great falls Montana
    Posts
    177
    Sorry the pictures are tilted....

  3. #3
    Boolit Master
    Bo1's Avatar
    Join Date
    Jan 2013
    Location
    Tioga, LA
    Posts
    376
    Very nice work. In your opinion, what is the longest single action barreled pistol that would fit the holster? I have several Blackhawks. Also, a picture of the knife would be nice as well.

    Thanks, Bo

    (My first and last name starts with a "B")
    "Those who hammer their guns into plows, will plow for those who do not"
    Thomas Jefferson

  4. #4
    Boolit Master


    Tnfalconer's Avatar
    Join Date
    Jul 2016
    Location
    Great falls Montana
    Posts
    177
    Hey Bo,
    You could get a longer barrel single action in there like a 4.5 or so but the barrel might stick out of the bottom of the holster slightly. I could and would give you the information to wet mold it to whatever revolver you wanted to use. For that matter if it just didn't work out I could make you another cross draw holster for anything you wanted to match the rig for my material costs say 50.00? I really put a lot of time and effort into this rig and I want it to have a good home.

  5. #5
    Boolit Master


    Tnfalconer's Avatar
    Join Date
    Jul 2016
    Location
    Great falls Montana
    Posts
    177
    The knife that is included is a hand forged Bowie from one of the knife makers I make sheaths for. I get them from time to time to try out and this is one of them. It's a full 1/4" full tang d-2 tool steel and a razor blade. Paper Micarta handles on it. It's a nice knife.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	59 
Size:	83.5 KB 
ID:	199256   Click image for larger version. 

Name:	image.jpg 
Views:	53 
Size:	79.4 KB 
ID:	199257  

  6. #6
    Boolit Master


    Tnfalconer's Avatar
    Join Date
    Jul 2016
    Location
    Great falls Montana
    Posts
    177
    Had a few questions so here are some answers:
    The diameter can be adjusted if needed. Either a little smaller or a little larger. The holster can be remolded to about any single action with a 4.5" or shorter barrel

  7. #7
    Boolit Master


    Tnfalconer's Avatar
    Join Date
    Jul 2016
    Location
    Great falls Montana
    Posts
    177
    Bump, I know someone needs this. PM me, let's make a deal.

  8. #8
    Boolit Master
    Join Date
    Sep 2010
    Posts
    247
    PM coming with a question.
    Bob

  9. #9
    Boolit Master


    Tnfalconer's Avatar
    Join Date
    Jul 2016
    Location
    Great falls Montana
    Posts
    177
    Questions answered via PM.

  10. #10
    Boolit Master


    Tnfalconer's Avatar
    Join Date
    Jul 2016
    Location
    Great falls Montana
    Posts
    177
    Still available, if any others are interested give me a shout!

  11. #11
    Boolit Master


    Tnfalconer's Avatar
    Join Date
    Jul 2016
    Location
    Great falls Montana
    Posts
    177
    Price reduced to 300.00 shipped or trade. I am looking for a Ruger old army. Last call

  12. #12
    Boolit Master


    Tnfalconer's Avatar
    Join Date
    Jul 2016
    Location
    Great falls Montana
    Posts
    177
    Mods please delete, I am moving this to another place and don't want a cross post violation. THANKS!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check