I finally found a source for those wavy washers that tension the sprue plate. Arsenal Molds sells them, 2 for $5.00.
I finally found a source for those wavy washers that tension the sprue plate. Arsenal Molds sells them, 2 for $5.00.
Ace hardware has them also
Do they wear out?
Sent from my iPhone using Tapatalk Pro
[QUOTE=oteroman;4095382]Do they wear out?
.............Yes, but for an individual using them as tension washers on a SP pivit bolt, it would be a full time job that would last long after you became tired of the whole idea They're not meant to be tightened down until they're flat, but simply enough (in casting) to keep the SP flat against the face of the blocks. Their use in that capacity is great. Lee uses them on their 6 cav mould blocks on the SP pivit bolt and the SP tension bolt.
.................Buckshot
Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always
Proud former Shooters.Com Cast Bullet alumnus and plank owner.
"The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance
Found some at HD and Lowes, a dollar + for 6
Belleville washers are better, and last longer.
As supplied on NVB molds.
Hooroo.
Regards, Trevor.
Australia
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |