RotoMetals2Titan ReloadingStainLess Steel MediaLee Precision
Inline FabricationMidSouth Shooters SupplyADvertise hereGraf & Sons

Page 5 of 5 FirstFirst 12345
Results 81 to 95 of 95

Thread: Whay do you reload with Red Dot?

  1. #81
    Boolit Master

    Ickisrulz's Avatar
    Join Date
    Apr 2010
    Location
    Shawnee, OK
    Posts
    2,092
    Quote Originally Posted by TCLouis View Post
    Ickisrulz

    Any velocity info on that 338 Mag loading?
    Somewhere around 1475 fps. Accuracy wasn't too bad, about 1.5 inches at 85 yards. I didn't do any fine tuning since I pretty much just shoot at steel swinging targets off a pair of shooting sticks while sitting in my front yard.
    Last edited by Ickisrulz; 08-19-2017 at 09:21 AM.

  2. #82
    Boolit Master
    Join Date
    Feb 2013
    Posts
    225
    I run 13.9 go Red Dot under a NOE 312290 (222.8 gr) in a 300 win mag.

  3. #83
    Boolit Master waco's Avatar
    Join Date
    Jan 2009
    Location
    Springfield, Oregon
    Posts
    2,505
    I shoot the NOE 30 Hunter 190gr plain base in my Rem. 788 .308 with 10.5gr Redot @ 1325fps and five shot groups less than .75" @ 100 yards.Attachment 202582
    The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
    Proverbs 1:7

  4. #84
    Boolit Master

    alamogunr's Avatar
    Join Date
    Mar 2005
    Location
    Tennessee
    Posts
    3,066
    I seem to remember a 9mm load using 4.0 gr of Red Dot under a Lee 105 gr SWC. Now I can't find it. I'm getting ready to load a bunch for son and DIL to use for practice in a Ruger P95 and S&W Shield. I haven't given them the Shield yet so I plan to break it in to see if this boolit will work but don't want to start loading without more guidance on the load of Red Dot.

    I'm not worried about the P95. It seems to digest just about anything fed thru it.

    Anybody got a confirmation or recommendation?
    John
    W.TN

  5. #85
    Boolit Master

    Finster101's Avatar
    Join Date
    Aug 2009
    Location
    SW Fla
    Posts
    987
    alamogunr that is the 9mm load I have used for a couple of years now with no problems. I don't like messing with the Pro 1000 once it's set up and smooth and with that recipe I have no need or intention to.

  6. #86
    Boolit Master

    alamogunr's Avatar
    Join Date
    Mar 2005
    Location
    Tennessee
    Posts
    3,066
    Thanks! I'm going to set up the Dillon 550B and load a few to put across the chrono and see how they hit the target at about 15 yds. I'm very careful about loads that I give to sons(& DIL's).

    Before I posted above, I threw a few charges to see how they looked. There shouldn't be any risk of an overcharge.
    John
    W.TN

  7. #87
    Boolit Master GhostHawk's Avatar
    Join Date
    Mar 2014
    Location
    Fargo ND
    Posts
    3,572
    I have shot Red Dot in 9mm from 3 to 4.5 grains with 124, 125, 158 gr cast.
    It all works, the higher end loads I use in my Hipoint Carbine, or my 9mm handi rifle.

    I have shot them in the Hipoint C9 but they are a bit snappy for my taste.

    3 to 3.5 is pretty mellow especially with the lighter bullets.

  8. #88
    Boolit Master
    Eddie Southgate's Avatar
    Join Date
    Dec 2016
    Location
    Southern Middle Tennessee
    Posts
    193
    With the exception of Maybe the belted magnum stuff I can't think of anything you could not work up a god load for . It is in my top 4 and has been for over 50 years .
    Grumpy Old Man With A Gun....... Do Not Touch !!

  9. #89
    I'm A Honcho!

    Rattlesnake Charlie's Avatar
    Join Date
    Nov 2007
    Location
    Los Alamos, NM
    Posts
    1,041
    I've always used Red Dot for handgun and even some reduced rifle loads. If you search for "The Load" by C.E. Harris, you'll find some interesting info. And, when powder was "hard to come by", no problem with "shotgun powders".

    1.4 gr Red Dot under 100 gr RFN in .380 ACP
    4.0 gr Red Dot under 125 gr RFN in 9mm
    4.0 gr Red Dot under 125 gr RFN in .38 Spl
    4.5 gr Red Dot under 150 gr TC in .40 S&W
    5.0 gr Red Dot under 200 gr SWC in .45 ACP
    6.0 gr Red Dot under 250 gr SWC/RFN in .44 mag or .45 Colt

    Too many 12 ga shotshell recipes to list here. All light field or target loads.

  10. #90
    I'm A Honcho!

    Rattlesnake Charlie's Avatar
    Join Date
    Nov 2007
    Location
    Los Alamos, NM
    Posts
    1,041
    I know it ain't Red Dot, but don't overlook other "fast" shotgun powders. I saw my buddy shoot a 200 yd group out of his scoped Marlin 336 in .30-30 that I had loaded 10 gr of Green Dot under a 170 gr Lee RFN GC that grouped into a little less than three inches. I would not have believed it had I not seen it. Yes, it dropped close to two feet, but the group was awesome.

  11. #91
    Boolit Master
    Join Date
    Nov 2010
    Posts
    4,132
    I got Red Dot a few years back when other powders couldn't be found. It seems to burn cleaner at least my opinion than say WW231 does. I've found it to be accurate and another favorite like UNIQUE in my book. Being older than some I tend to be stuck in my ways and prefer the older powders over the newer ones that I haven't tried. I've loaded 9mm, 38/357, 44 mag, and 45LC with it and been very happy. I've never tried it in 45 acp simply because WW231 has been my favorite in that cartridge. I will have to try it in my 1911's.

  12. #92
    Boolit Master JBinMN's Avatar
    Join Date
    Feb 2017
    Location
    Goodhue County, Minnesota
    Posts
    862
    Quote Originally Posted by Rattlesnake Charlie View Post
    I've always used Red Dot for handgun and even some reduced rifle loads. If you search for "The Load" by C.E. Harris, you'll find some interesting info. And, when powder was "hard to come by", no problem with "shotgun powders".

    1.4 gr Red Dot under 100 gr RFN in .380 ACP
    4.0 gr Red Dot under 125 gr RFN in 9mm
    4.0 gr Red Dot under 125 gr RFN in .38 Spl
    4.5 gr Red Dot under 150 gr TC in .40 S&W
    5.0 gr Red Dot under 200 gr SWC in .45 ACP
    6.0 gr Red Dot under 250 gr SWC/RFN in .44 mag or .45 Colt

    Too many 12 ga shotshell recipes to list here. All light field or target loads.
    Here is an online downloadable version to read of , "The Load of 13 Grains of Red Dot", By C.E. Harris
    https://www.scribd.com/document/2814...f-Red-Dot-docx

    Good read, IMO.
    "If ya don't like my gate, ya don't have to swing on the hinges..." - L. Ackerman ( RIP)
    *------*
    "A man ought ta do what he thinks is best" - "Hondo" Lane.(John Wayne)

  13. #93
    Boolit Master

    LUCKYDAWG13's Avatar
    Join Date
    Jan 2011
    Location
    Northern Illinois
    Posts
    2,416
    Just thought i would bring this up one more time
    kids that hunt and fish dont mug old ladies

  14. #94
    Boolit Master
    Join Date
    Feb 2006
    Location
    Peepels Republik of Nu Jork
    Posts
    300
    Quote Originally Posted by mozeppa View Post
    i'm currently loading 10,000 .25 acp's with 1.3 grains red dot under a itty bitty bullet.

    why???
    "Only two things are infinite; the universe and human stupidity.......and I'm not sure about the universe..........."

    Albert Einstein

  15. #95
    Boolit Master GhostHawk's Avatar
    Join Date
    Mar 2014
    Location
    Fargo ND
    Posts
    3,572
    Because he can?

Page 5 of 5 FirstFirst 12345

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check