My brother and I bought 100pcs of PPU in .338 Lapua to save some $$$
I'm only on my second reload now......Time will tell.
My brother and I bought 100pcs of PPU in .338 Lapua to save some $$$
I'm only on my second reload now......Time will tell.
The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
Proverbs 1:7
I've used almost a dozen different PPU loads, .308, .243, 7mm-08, 7mmRem Mag, 22-250, 223, the list goes on. All of it is good stuff. In fact, I'm trying to get them to make a 35 Remington offering. If you don't like it, send it my way.
Pain heals, chicks dig scars, glory ... lasts forever.
Retired USN
NRA Life
Mine has held up well to 7 firings so far. I size with Lee collet die
Come on, the Grendles were all RECALLED !
Not an answer to the original question, some American 6.5x55 has .308 heads. European 6.5x55 will probably (should) not fit into a .308/standard shell holder and a correct 6.5x55 shell holder will be very loose on .308/standard case heads. My 6.5x55 has an 8mm bolt face so I use Remington brass with the U.S. case head. I built it on a 98 action.
Sometimes life taps you on the shoulder and reminds you it's a one way street. Jim Morris
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |