RotoMetals2Lee PrecisionInline FabricationWideners
MidSouth Shooters SupplyTitan ReloadingRepackboxADvertise here

Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 49

Thread: CB load data: online sources

  1. #21
    Banned
    Join Date
    Jul 2016
    Posts
    2,912
    Lyman Cast Bullet Handbook #3, multiple older reloading handbooks & downloadable load data

    https://onedrive.live.com/?authkey=%...%21238&o=OneUp

    Courtesy of JBinMN

    This one has many sources in it, you just have to flip pages(click)/navigate through it. There are 29 pages to choose from & not all are for reloading data, but there are a few in there on some of the pages of that library that would be useful for the data perhaps...This link below is #18 of 29 , and is the Lyman Cast Bullet handbook. The choice of pages it at the top right on the page & some can be downloaded if ya like...

  2. #22
    Banned
    Join Date
    Jul 2016
    Posts
    2,912
    Lyman and Ideal Mold Descriptions;
    http://ps-2.kev009.com/ohlandl/Cast_...criptions.html

  3. #23
    Banned
    Join Date
    Jul 2016
    Posts
    2,912
    IMR® TRAIL BOSS® REDUCED LOADS FOR RIFLE AND PISTOL

    https://www.hodgdon.com/wp-content/u...-loads-r_p.pdf

  4. #24
    Banned
    Join Date
    Jul 2016
    Posts
    2,912
    This is a great place to find stuff

    https://ammoseek.com/

  5. #25
    Boolit Master
    JBinMN's Avatar
    Join Date
    Feb 2017
    Location
    Goodhue County, SE Minnesota
    Posts
    3,069
    Thanks for keeping the list updated & adding on occasion!
    2nd Amend./U.S. Const. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."

    ~~ WWG1WGA ~~

    Restore the Republic!!!

    For the Fudds > "Those who appease a tiger, do so in the hope that the tiger will eat them last." -Winston Churchill.

    President Reagan tells it like it is: https://www.youtube.com/watch?v=c6MwPgPK7WQ

    Phil Robertson explains the Wall: https://youtu.be/f9d1Wof7S4o

  6. #26
    Banned
    Join Date
    Jul 2016
    Posts
    2,912
    Shellholder Cross Reference Chart downloadable

    https://issuu.com/grafandsons/docs/s...ss_ref_chart/2

  7. #27
    Boolit Master
    JBinMN's Avatar
    Join Date
    Feb 2017
    Location
    Goodhue County, SE Minnesota
    Posts
    3,069
    GRMPS,

    Was told about these links. I will ry to go over the rest of them sometime in the next day. Most likely over night when I can't sleep.


    Here are the ones I checked & either found replacements or information on their situation:
    Shootersworld New page: https://shootersworldsc.com/wp-conte...l-12-16-16.pdf

    Accurate powder currently not available. ( Prolly due to new info being added) http://www.accuratepowder.com/load-data/

    Vihtavuori New page: http://www.vihtavuori.com/en/reloadi...reloading.html

    Grafs (Vectan powder) is now a downloadable pdf file: https://www.grafs.com/retail/catalog...lResourceId/20

    Reloaders nest: Website is down/dead http://website.informer.com/reloadersnest.com
    2nd Amend./U.S. Const. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."

    ~~ WWG1WGA ~~

    Restore the Republic!!!

    For the Fudds > "Those who appease a tiger, do so in the hope that the tiger will eat them last." -Winston Churchill.

    President Reagan tells it like it is: https://www.youtube.com/watch?v=c6MwPgPK7WQ

    Phil Robertson explains the Wall: https://youtu.be/f9d1Wof7S4o

  8. #28
    Banned
    Join Date
    Jul 2016
    Posts
    2,912
    Updated lists. Thanks JBinMN

  9. #29
    Boolit Master newton's Avatar
    Join Date
    Mar 2012
    Location
    Arkansas
    Posts
    1,739
    Might could add this to the list. I just found it the other day. Its the parent directory which you can then drill down and go to the different links. Not sure if it would be better to have them all different individual links, or this one main link. I'll leave it up to those smarter than I.

    http://marvinstuart.com/firearm/Manuals/

  10. #30
    Banned
    Join Date
    Jul 2016
    Posts
    2,912
    Quote Originally Posted by newton View Post
    Might could add this to the list. I just found it the other day. Its the parent directory which you can then drill down and go to the different links. Not sure if it would be better to have them all different individual links, or this one main link. I'll leave it up to those smarter than I.

    http://marvinstuart.com/firearm/Manuals/
    I added it, Thank You Newton

  11. #31
    Banned
    Join Date
    Jul 2016
    Posts
    2,912
    http://www.makarov.com/
    9x19 Makarov & much more
    7.62 x 25 Tokarov data

  12. #32
    Banned
    Join Date
    Jul 2016
    Posts
    2,912
    New IMR "Trail Boss" Smokeless Powder
    .38 Special
    STARTING LOAD - Case: Win. / Primer: WSP / Barrel: 7.7" / Bullet: .357", 158 grain LSWC / Powder: 2.7 grains Trail Boss / MV 661 fps / MAP: 11,400 PSI.
    MAXIMUM LOAD - Case: Win. / Primer: WSP / Barrel: 7.7" / Bullet: .357", 158 grain LSWC / Powder: 4.2 grains Trail Boss / MV 804 fps / MAP: 13,700 PSI
    .357 Magnum
    STARTING LOAD - Case: Win. / Primer: WSPM / Barrel: 10" / Bullet: .357", 158 grain LSWC / Powder: 3.2 grains Trail Boss / MV 754 fps / MAP: 16,500 CUP.
    MAXIMUM LOAD - Case: Win. / Primer: WSPM / Barrel: 10" / Bullet: .357", 158 grain LSWC / Powder: 4.2 grains Trail Boss / MV 865 fps / MAP: 20,400 CUP.
    .44 Special
    STARTING LOAD - Case: Starline / Primer: WLP / Barrel: 8" / Bullet: .430", 240 grain LSWC / Powder: 4.0 grains Trail Boss / MV 673 fps / MAP: 9,700 CUP.
    MAXIMUM LOAD - Case: Starline / Primer: WLP / Barrel: 8" / Bullet: .430", 240 grain LSWC / Powder: 5.2 grains Trail Boss / MV 763 fps / MAP: 11,700 CUP.
    .44 Magnum
    STARTING LOAD - Case: Win. / Primer: Rem. 2 1/2 / Barrel: 8.275" / Bullet: .430", 240 grain LSWC / Powder: 6.0 grains Trail Boss / MV 828 fps / MAP: 19,100 PSI.
    MAXIMUM LOAD - Case: Win. / Primer: Rem. 2 1/2 / Barrel: 8.275" / Bullet: .430", 240 grain LSWC / Powder: 7.3 grains Trail Boss / MV 917 fps / MAP: 21,600 PSI

  13. #33
    Banned
    Join Date
    Jul 2016
    Posts
    2,912
    BULLET DRAG CALCULATOR http://www.geoffrey-kolbe.com/drag.htm
    Thanks to akmac

  14. #34
    Boolit Master
    JBinMN's Avatar
    Join Date
    Feb 2017
    Location
    Goodhue County, SE Minnesota
    Posts
    3,069
    Another one to add if ya want to do it, & when ya get time...
    I did not see it when searching... Maybe it is already there in the list, but I did not see it...

    http://blog.westernpowders.com/wp-co...1-2016_Web.pdf
    2nd Amend./U.S. Const. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."

    ~~ WWG1WGA ~~

    Restore the Republic!!!

    For the Fudds > "Those who appease a tiger, do so in the hope that the tiger will eat them last." -Winston Churchill.

    President Reagan tells it like it is: https://www.youtube.com/watch?v=c6MwPgPK7WQ

    Phil Robertson explains the Wall: https://youtu.be/f9d1Wof7S4o

  15. #35
    Banned
    Join Date
    Jul 2016
    Posts
    2,912
    Twist Rate Stability Calculator http://www.bergerbullets.com/twist-rate-calculator/

  16. #36
    Boolit Master

    Rcmaveric's Avatar
    Join Date
    Jul 2017
    Location
    Jacksonville, FL
    Posts
    1,501
    You dont hear it mentioned often. Loaddata.com is my favorite site. Gives you access to all the load data published by Wolfe publishing. That includes jacketed, cast, and shot shell. All the recipes from most major powder distrubutors, Lyman, Lee, Handloader and few other sources (that includes both new and old, like how older Lyman recipes are different from new). You can export them, save them or print them for your own collections. Down side is you dont get the articles. But i own 3 cast bullet manuals and now have I have about every load data ever publeshed at my searchable finger tips. I bought it about 2 years and I constantly use it. It helps also when other people ask for data. I can point them to the right manual.

    When it generates the load data tables it tells what manual it came from or if its a Handloader recipe what issue number.
    "Speak softly and carry a big stick; you will go far."
    ~Theodore Roosevelt~

  17. #37
    Boolit Bub
    Join Date
    Mar 2009
    Location
    Florida
    Posts
    33
    Very good info, thanks

  18. #38
    Banned
    Join Date
    Jul 2016
    Posts
    2,912
    SHOTSHELL PRIMER SUBSTITUTIONS EFFECTING PATTERNS By: Tom Armbrust http://www.armbrust.acf2.org/primersubs.htm

  19. #39
    Banned
    Join Date
    Jul 2016
    Posts
    2,912
    From Lyman Shotshell Reloading Handbook 5th Edition


  20. #40
    Boolit Master
    JBinMN's Avatar
    Join Date
    Feb 2017
    Location
    Goodhue County, SE Minnesota
    Posts
    3,069
    Thanks!

    2nd Amend./U.S. Const. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."

    ~~ WWG1WGA ~~

    Restore the Republic!!!

    For the Fudds > "Those who appease a tiger, do so in the hope that the tiger will eat them last." -Winston Churchill.

    President Reagan tells it like it is: https://www.youtube.com/watch?v=c6MwPgPK7WQ

    Phil Robertson explains the Wall: https://youtu.be/f9d1Wof7S4o

Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check