Mihec 360640 Cramer HP or 6 Cav solid

**PWS** · 07-04-2017, 01:32 AM

Thanks Wasalmon, please have Miha contact me when ready at: mikefairbanks45 at yahoo dot com

**MiHec** · 07-04-2017, 03:11 AM

Originally Posted by PWS

Is this cut on the same size block as the 4 cavity? If so, I'm in for a solid nose 6cavity brass.

6cav brass is same size block as 4 cav hp

**Wasalmonslayer** · 07-04-2017, 01:34 PM

Updated pws I put you down for regular lube groove let me know if you want hi tek style

**PWS** · 07-04-2017, 04:39 PM

Thanks Slayer, you anticipated correctly - I do want the regular lube groove style.

And, thanks Miha for confirming that the 6cav is the same as the 4cav.

Looking forward to putting this to use!

**Wasalmonslayer** · 07-07-2017, 04:06 PM

Bump for a great design

**Low Budget Shooter** · 07-07-2017, 05:31 PM

This bullet has been consistently accurate for me in both revolver and carbine. The shape also casts easily and lets go of the mold readily.

**Dr-Greg** · 07-08-2017, 12:20 AM

8 Cavity solid hi tek

greg ((at)) watchmans tower dotttt commmmm

**Wasalmonslayer** · 07-08-2017, 12:37 AM

Updated

**Wasalmonslayer** · 07-09-2017, 08:24 PM

Sunday evening bump

**slide** · 07-10-2017, 07:00 AM

Will the 8 cavity hi-tek mold have the Lee style sprue cutter?

**Wasalmonslayer** · 07-10-2017, 08:36 AM

Slide,
Yes it will have that cutter handle included

**slide** · 07-10-2017, 09:15 AM

I forgot. Will the length be any problem with a Lee 20 lb. pot?

**Wasalmonslayer** · 07-10-2017, 09:53 AM

No sir same length as The six cavity Miha makes.

**slide** · 07-10-2017, 10:24 AM

Put me down for an eight cavity aluminum hi tek mold. bennyritteratyahoodotcom

**Wasalmonslayer** · 07-10-2017, 10:42 AM

Got you down slide

**bluejay75** · 07-11-2017, 09:14 PM

8 cavity, .358, Hi Tek. I don't think I specified diameter. Would be great if I didn't have to size them.

**Wasalmonslayer** · 07-11-2017, 09:39 PM

Updated

**slide** · 07-12-2017, 01:48 AM

Wasalmonslayer, I didn't specify on size. Do we have a choice ? I would like to have .360. My casting alloy is range scrap with added tin so not sure what this mold will cast at. I can always size down but it is hard to add.

**Wasalmonslayer** · 07-12-2017, 09:17 AM

This mold default is .360.
I powder coat so it adds diameter so in my application a .360 as cast powder coated will be .3615 - .362.
I size to .358 so no need for the extra diameter for me.
But if you need .360 as your finished then you will want to start at .360.

Hope that helps

**slide** · 07-12-2017, 12:53 PM

.360 for me

BP	Bronze Point	IMR	Improved Military Rifle	PTD	Pointed
BR	Bench Rest	M	Magnum	RN	Round Nose
BT	Boat Tail	PL	Power-Lokt	SP	Soft Point
C	Compressed Charge	PR	Primer	SPCL	Soft Point "Core-Lokt"
HP	Hollow Point	PSPCL	Pointed Soft Point "Core Lokt"	C.O.L.	Cartridge Overall Length
PSP	Pointed Soft Point	Spz	Spitzer Point	SBT	Spitzer Boat Tail
LRN	Lead Round Nose	LWC	Lead Wad Cutter	LSWC	Lead Semi Wad Cutter
GC	Gas Check

Thread: Mihec 360640 Cramer HP or 6 Cav solid

Thread Tools

Posting Permissions