Had another with drawl we are down to 14 now
I'll pick up that slack. Put me down for an
8 cavity aluminum solid, with lube groove, for
mhkilgore at mac decimal com
I would like a 6 cavity with lube groove, SOLID. RedHawk357Mag@Gmail(DOT)com
Thank you
Sent from my XT1254 using Tapatalk
Ruger RedHawk 357 Mag 44 Mag GP100 Davidson Exclusive 5" Security Six 2 3/4", Speed Six 4"
Smith Wesson 629 PP and 686 PP, 617
Just need 4 more to get into last call!!
Any one know how these will work in a Marlin 1894? Pretty good I imagine, unless the OAL is to long. Any idea what the meplat to crimp distance is?
Last edited by Frogfoot; 11-19-2017 at 09:49 AM.
Go on then put me down for a 4 cavity HP with Lube groove
tom...(at)...tomanddonna...(dot)...co...(dot)...uk
Just need 3 more now and we can last call it
FYI, for those of you who are so inclined, the 360640 HP bullet makes a dandy 147 grain 9mm load. I am NOT so inclined, but I tried it just out of curiosity, and it works great. 3.7 gr Power Pistol in a 3.5" barrel gave me 860 fps with low recoil and good accuracy. Bullet loaded just to where crimp groove doesn't show fed perfectly in my pistol.
Thanks for the heads up low budget I may have to give that a try
Please put me down for;
2 Cavity HP GC .360" all pins, standard lube groove.
I would also like an aluminum 8 cavity .360" solid, plain base, standard lube groove.
amadaus101 at outlook dot com
Last edited by GoodAlloy; 11-26-2017 at 10:02 PM.
How about I close things out. Would you put me down for a six cavity solid in addition to the HP mould that I’m already down for and a set of handles as well. pdevers at aol dot com Thank you sir, for running this buy.
Sent from my iPhone using Tapatalk
Sign me up for a 4 cavity hp gas check brass mold. Please cancel my order as a gas check is not available. I already have a plain base mold. hicard21atoutlookdotcom
Last edited by hicard; 11-30-2017 at 11:12 AM.
This country has gone to hell but now there is hope for us.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |