WidenersStainLess Steel MediaMidSouth Shooters SupplyRotoMetals2
RepackboxGraf & SonsInline Fabrication

Page 1 of 8 12345678 LastLast
Results 1 to 20 of 141

Thread: Mihec 360640 Cramer HP or 6 Cav solid

  1. #1
    I'm A Honcho! Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,391

    Mihec 360640 Cramer HP or 6 Cav solid

    MiHec 360640 Cramer HP in 2 cav or 4 cav hp or 6 cav solid brass or 8 cav solid aluminum.
    This is a run of an earlier design produced by BRP. This will be a single crimp groove, cramer brass HP mold that is suitable for the 38 Special, 357 Magnum and other suitable caliber handguns with cylinders long enough to suit them. It will cast at 0.360". The original weight was about 140 gr as a hollow point, which is the only way i've shot it. The nose design is exactly like the 359640 as made by MiHec ahead of the crimp grooves. It is VERY accurate as can be attested to by several board members here in either design. A blank plug will provide that as well as a round and penta HP depending on what was wanted. The following is the discussion thread.

    THIS ONE IS CLOSED!!

    http://castboolits.gunloads.com/showthread.php?t=145131

    I just copied and pasted this old buy per Mihas recommendation.
    Below are the images of this bullet.
    It cast around 155 as a solid.
    This is a great bullet in many applications!

    I just was informed from Mihec that we can do the 8 cavity solid aluminum and we can do it in the hi tek non lube grove also in all blocks

    Cramer hp 2 or 4 Cavity lube groove style all pins included
    Cramer hp 2 or 4 Cavity hi tek smooth sided all pins included

    8 cavity aluminum lube groove solid
    8 cavity aluminum hi tek smooth sided


    all pins included by default.

    prices:

    2 Cavity HP: 95 euros including shipping, all pins, top punch and allen keys
    4 Cavity HP: 135 euros including shipping, all pins, top punch and allen keys

    2 Cavity Solid: 75 euros including shipping, top punch and allen keys
    6 Cavity Solid: 95 euros including shipping, top punch and allen keys

    8 cavity aluminum solid 95 euros
    The conversion of Euro's to dollars will happen when Miha sends the invoice via PayPal.
    GROUP BUY DISCOUNT OF 15% GIVEN AT TIME OF INVOICE

    Please post your disguised email address and what mold you would like.


    Name:  IMG_3688.JPG
Views: 2129
Size:  7.0 KBName:  IMG_3689.JPG
Views: 2129
Size:  27.3 KBName:  IMG_3691.JPG
Views: 2131
Size:  22.6 KB
    Last edited by Wasalmonslayer; 01-05-2018 at 01:50 PM.

  2. #2
    I'm A Honcho! Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,391
    List of Mold buyers -

    Hi Tek HP list

    1) jtkchong@hotmail(dot)com - 4 Cav Brass HP
    2)
    3)
    4)
    5)
    6)


    Hi Tek Solid list

    1)
    2)
    3)
    4)
    5)


    Regular Lube Groove HP list

    1) lacresta at hotmail.com - 2 Cav HP all pins .360
    2) p devers at aol dot com - 4 Cav HP with handles .360
    3) liide at hotmail dot com - 4 Cav HP all pins .360 with handles
    4) jeff DOTT richard DOTT young ATTT gmail DOTT commm - 2 Cav HP all pins .358
    5) tom garcia 1 5 at yahoo dot com - 4 Cav HP all pins .360
    6) dearborn416 AT yahoo DOT com - 4 Cav HP all pins .360
    8) larrybohn at ashlandhome dot net - 4 Cav HP all pins .360
    9) bulls (underscore) eye (underscore) 264 (at) hott maill dott comm 4 Cav HP all pins .358
    10) kahngr at potsdam dot edu - 2 Cav HP all pins .360 and a set of handles
    11) gspatton at gttransmissions.com - 4 Cav HP all pins .360
    12) paska_10AT hotmail Dott comm - 2 Cav HP all pins .360
    13) tom...(at)...tomanddonna...(dot)...co...(dot)...uk - 4 Cav HP all pins .360
    14) amadaus101 at outlook dot com - 2 Cav HP all pins .360
    15) saumbi109 AT defnet dot com - 4 Cav HP all Pins .360
    16)
    17)
    18)

    Regular Lube Grove Solid List

    1) mikefairbanks45 at yahoo dot com - 6 Cavity brass
    2) bulls (underscore) eye (underscore) 264 (at) hott maill dott comm - 8 Cavity Aluminum
    3) mhkilgore at mac decimal com - 8 Cavity Aluminum
    4) RedHawk357Mag@Gmail(DOT)com - 6 Cavity brass
    5) amadaus101 at outlook dot com - 8 Cav Aluminum .360
    6) pdevers at aol dot com - 6 Cav Brass .360 with handles
    7) max at yvmarine dot com - 8 Cav Aluminum .358
    Last edited by Wasalmonslayer; 12-31-2017 at 12:34 PM.

  3. #3
    Boolit Master wonderwolf's Avatar
    Join Date
    Apr 2007
    Posts
    1,545
    What is the length from the crimp groove to the meplat on this one?
    My firearms project blog

  4. #4
    I'm A Honcho! Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,391
    From past discussions I believe it is .340.

    This is the 145 gr hollow point 155 gr solid non hp.
    These weights are from past castings with a two cavity version of this mold with range scrap lead.

    I will measure a couple of my cast bullets to verify length tonight.

    Just measured and chatted with mihec .340 to middle of groove and .336 to the first edge of it.
    Last edited by Wasalmonslayer; 06-21-2017 at 09:05 AM.

  5. #5
    I'm A Honcho! Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,391
    Beagle would you like lube groove or no lube groove?

  6. #6
    I'm A Honcho! bluejay75's Avatar
    Join Date
    Mar 2017
    Posts
    901
    Im in for a 8 cavity Hi Tek.

    Im j_bownes at yahoo dot com
    You never know how you rank amongst men 'til you have seen what will break another man.
    The original "Bluejay" US Army/ US Navy 1945-1970.

  7. #7
    Boolit Buddy
    Join Date
    Jan 2011
    Location
    West. Aus
    Posts
    139
    Do the hitek bullets still have the crimp groove?

  8. #8
    I'm A Honcho! Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,391
    Good morning

    Yes sir they do.

  9. #9
    I'm A Honcho! Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,391
    Lists Updated

    Thanks Guy!

  10. #10
    Boolit Buddy Low Budget Shooter's Avatar
    Join Date
    Feb 2010
    Location
    Texahoma
    Posts
    401
    Could we please see a picture of an 8-cavity mold? I know these aren't made yet, I mean from some previous group buy, maybe? Some recent 35 cal group buys have offered 6-cavity brass molds; could that be an option?
    Thanks!

  11. #11
    I'm A Honcho! Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,391
    Here is a photo of a mold run he is working on that's 8 Cavity.

    I will ask about the 6 Cav Brass solid

    Click image for larger version. 

Name:	IMG_3736.jpg 
Views:	58 
Size:	28.7 KB 
ID:	198565

  12. #12
    Vendor Sponsor

    MiHec's Avatar
    Join Date
    May 2008
    Location
    Europe
    Posts
    2,364
    6 cav brass is possible
    www.MP-MOLDS.com

    FaceBook
    --------------------------------------------------------------------
    If you want to win you must not lose

  13. #13
    Boolit Buddy Low Budget Shooter's Avatar
    Join Date
    Feb 2010
    Location
    Texahoma
    Posts
    401
    Thanks for those answers.

  14. #14
    I'm A Honcho! Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,391
    Evening Bump

  15. #15
    Boolit Buddy
    Join Date
    Feb 2007
    Posts
    218
    As this is my favorite and most accurate 357 mold, What is the estimated time of shipment?

    Thanks
    Kirk

  16. #16
    I'm A Honcho! Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,391
    I am not 100% sure on when it will close but reruns usually go quickly because Miha already has the tooling.
    Jump on if you like. Even if there is a small wait it is worth it!!

  17. #17
    Boolit Mold
    Join Date
    Nov 2016
    Posts
    8
    Please sign me up for a four cavity w/ all the pins and lube groove. Also, a set of handles.
    p devers at aol dot com ( no space between p and d )

    Thanks, Pat
    Last edited by JPD; 07-03-2017 at 02:59 AM. Reason: Forgot handles. (-:

  18. #18
    Boolit Buddy PWS's Avatar
    Join Date
    Dec 2010
    Location
    Kodiak, AK
    Posts
    244
    Quote Originally Posted by MiHec View Post
    6 cav brass is possible
    Is this cut on the same size block as the 4 cavity? If so, I'm in for a solid nose 6cavity brass.

  19. #19
    I'm A Honcho! Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,391
    I believe it is cut on the same size block.

    Let me know your email address and I will put you on the list.

  20. #20
    I'm A Honcho! Wasalmonslayer's Avatar
    Join Date
    Jan 2014
    Location
    Washington
    Posts
    1,391
    Updated

Page 1 of 8 12345678 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check