MiHec 360640 Cramer HP in 2 cav or 4 cav hp or 6 cav solid brass or 8 cav solid aluminum.
This is a run of an earlier design produced by BRP. This will be a single crimp groove, cramer brass HP mold that is suitable for the 38 Special, 357 Magnum and other suitable caliber handguns with cylinders long enough to suit them. It will cast at 0.360". The original weight was about 140 gr as a hollow point, which is the only way i've shot it. The nose design is exactly like the 359640 as made by MiHec ahead of the crimp grooves. It is VERY accurate as can be attested to by several board members here in either design. A blank plug will provide that as well as a round and penta HP depending on what was wanted. The following is the discussion thread.
THIS ONE IS CLOSED!!
http://castboolits.gunloads.com/showthread.php?t=145131
I just copied and pasted this old buy per Mihas recommendation.
Below are the images of this bullet.
It cast around 155 as a solid.
This is a great bullet in many applications!
I just was informed from Mihec that we can do the 8 cavity solid aluminum and we can do it in the hi tek non lube grove also in all blocks
Cramer hp 2 or 4 Cavity lube groove style all pins included
Cramer hp 2 or 4 Cavity hi tek smooth sided all pins included
8 cavity aluminum lube groove solid
8 cavity aluminum hi tek smooth sided
all pins included by default.
prices:
2 Cavity HP: 95 euros including shipping, all pins, top punch and allen keys
4 Cavity HP: 135 euros including shipping, all pins, top punch and allen keys
2 Cavity Solid: 75 euros including shipping, top punch and allen keys
6 Cavity Solid: 95 euros including shipping, top punch and allen keys
8 cavity aluminum solid 95 euros
The conversion of Euro's to dollars will happen when Miha sends the invoice via PayPal.
GROUP BUY DISCOUNT OF 15% GIVEN AT TIME OF INVOICE
Please post your disguised email address and what mold you would like.