Titan ReloadingStainLess Steel MediaLee PrecisionGraf & Sons
ADvertise hereRotoMetals2Inline FabricationMidSouth Shooters Supply

Page 2 of 2 FirstFirst 12
Results 21 to 22 of 22

Thread: 310

  1. #21
    Boolit Master



    BrassMagnet's Avatar
    Join Date
    Apr 2012
    Posts
    2,053
    Quote Originally Posted by bedbugbilly View Post
    FYI - your "new" set of tongs are the "large" tongs and your "used" set of tongs are the "small" size tongs. The size of tong required (i.e. small or large) is determine by the cartridge/die set. Notice the difference in length of the tong part where the dies screw in to. The chart that is referred to should indicate the tong size required for the cartridge/die set. There should also be an "adapter" that screws in to the tong - usually included in the die sets but often "lost" over time. This adapter is sized to the cartridge that is being loaded. Many are interchangeable - example would be the adapter for the 30-06 which is interchangeable with the 8 X 57 Mauser. Preceding these aluminum tongs such as you have were the steel tongs which were stamped for the individual cartridge and the shell holes sized for that cartridge. Again, they can be interchangeable (steel tongs) as they often will work with cartridges of the same dimension (base). I don't load 30-06 but I have a set o 30-06 steel tongs that I use to reload my 8mm Mauser cartridges with utilizing a set of 310 8mm Mauser dies.

    Yep - a lot of folks pooh pooh the 310 tools and ask "why" when you can use a conventional press and dies, but I batch load my 8mm with a 140 ish grain lead boolit and with my 310 dies set up (lock rings in proper position) I can quickly change the dies out and load just as fast (in my opinion) as I can by using a press - plus, I can "feel" the seating of the boolit and the crimping process. It's just plain fun to see a finished round done with a hand loading tool!

    For my 38 specials, I have several sets of the dies that I have set up for various boolit weights/designs - even have a set I can load my 38 Colt Short & Long with. With the proper 310 "neck sizing die", it's an easy operation to neck size my 8mm and 30-30 brass and loading the 30-30 with my 310 dies and tong is a easy and pleasurable process. And loading 45 Colt with the 310 is a hoot. I take my 310 sets with me when I go to AZ and can quickly reload what I shoot up!

    As you can tell - I love the 310 tools - but have to admit that I have never tried the Lee Classic Loaders. I have a set for 38 Special as well as 32-20 and once I get my new reloading bench set up (we just moved aver 40 + years) it's on my "to do" list.

    Would they look like this balloon head case?

    Click image for larger version. 

Name:	IMG_5323.jpg 
Views:	8 
Size:	19.0 KB 
ID:	202854
    Range pickup brass

    Click image for larger version. 

Name:	IMG_5324.jpg 
Views:	7 
Size:	19.7 KB 
ID:	202856
    Range pickup brass with a 38 Special cartridge

  2. #22
    Boolit Master



    skeettx's Avatar
    Join Date
    Jul 2009
    Location
    Amarillo, Texas
    Posts
    2,198
    Malamute
    I will defer to you,
    Please get them if you need them
    I have MANY sets of 310 stuff
    Mike
    NRA Benefactor 2004

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check