Hola, anybody know if the Lee 410 195 is a new design?
I have an old TL designed 210 that has not worked well for me and would like to try this Boolit with Green Dot or Universal.
Gracias
|
   
   
|
|
Hola, anybody know if the Lee 410 195 is a new design?
I have an old TL designed 210 that has not worked well for me and would like to try this Boolit with Green Dot or Universal.
Gracias
Last edited by armexman; 05-22-2017 at 02:19 PM. Reason: Delete in wrong forum
When I sit down to look at my rifles in the safe.....
I can very consistently shoot one inch groups at 100 yards.
When I sit on the bench at the shooting range.....
I always wish I was sitting down looking at my rifles in the safe.
I moved your post.
The 195gr isn't a new design, but it had been improved IMHO when Lee upgraded the design of their 2 cav blocks.
http://castboolits.gunloads.com/show...tyle-good-news
I use 7.0gr Red dot
~~~~~~~~~~~~~~
“If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
― The Dalai Lama, Seattle Times, May 2001
I cast 220 grain magma mold.
I can send you a couple hundred if you pm me your address.
Do you have the mold already or are you looking to buy a mold?
I have the mold but not the tumble Lube design quite accurate with red.dot
kids that hunt and fish dont mug old ladies
I use it in a 1858 Remington revised to .40 bore.
Lee sold it with spiral chatter marks on the sides of the SWC nose but I use it just the same.
I have the 41-195SWC I load it over unique.... it does the job!
The Lee 41-195-SWC is the original 41 mould from Lee. I was using it back in the '70s. Unfortunately I let the mould go when I traded off a M58. I use the TL41-175-SWC, the TL41-210-SWC, the RCBS 411-210-KT and a Lyman 410610 converted to PB in my Bisley Ruger.
The 41-195-SWC is an excellent 41 bullet......don't know why I haven't got another one.........probably because it's not available in a 6 cavity.......
Larry Gibson
Doc, I have 6 41 molds;3 LBT, 2 Lyman and the old Lee.
The lee210 Sized .412 is not accurate, plus I want a lighter Boolit and thought someone has had good luck with this Boolit. I have over 2000 cast projectiles and shoot 210,220,250 and 265 trainers, I just want to not send so much lead down range
When I sit down to look at my rifles in the safe.....
I can very consistently shoot one inch groups at 100 yards.
When I sit on the bench at the shooting range.....
I always wish I was sitting down looking at my rifles in the safe.
"The lee210 Sized .412 is not accurate"
What alloy?
What lube?
What load?
My Lee 210 is very accurate at low and medium 41 velocities.
Larry Gibson
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote
HATCH
