I am looking for a bullet for the 30-06 03-A3 accurate enough for offhand shooting at 100 yards.
Does anyone have any experience with bullets of about 135 grains such as: 31-134D
Thanks
I am looking for a bullet for the 30-06 03-A3 accurate enough for offhand shooting at 100 yards.
Does anyone have any experience with bullets of about 135 grains such as: 31-134D
Thanks
I use Accurate 31-134D in the 7.62x54R in a Finnish M39 with 6 grains of Bullseye. Scary accurate! Also works well in the .303 British.
Same charge should work well in an '06 if your bullets are sized smaller .311-.312 depending upon state of barrel and throat wear in your '03A3.
When ordering the mold from Accurate you can specify a smaller band diameter of .310-.311 better suited for the '06.
In the '06 I shoot 31-155D with 6 grains of Bullseye with very good results to 200 yards.
Attachment 195514
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
Far better off with this http://noebulletmolds.com/NV/product...roducts_id=338
she a one holer at 100 yds..either GC with 17.8 grains of 2400 or
7-9 grains of Unique PB
Last edited by guicksylver; 05-22-2017 at 10:34 AM.
Have used 8.0 gr. 700-x with the Lyman 311241 RNPB in 150 gr. Which will hold the ten ring on the small bore target at 100 yd from my .30-06.
"You will wantonly strike a hornet's nest which extends from mountains to ocean, and legions, now quiet, will swarm out and sting us to death. It is unnecessary; it puts us in the wrong; it is fatal." Robert Toombs, Democrat of Georgia, warning of the results of the imminent attack of the Confederacy upon Fort Sumter in Charleston Harbor, 1861
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |