Public benefits everyone.
I've got it 90% covered now thanks to some help in here, the last issue is the right side oven, the pilot is lit and adjusted, but the ignition is weak for the main gas. That is, when I turn it on, the pressure is VERY low. I have the 9/16 needle valve completely open at this point, no joy. Barely enough gas comes out to keep it lit. Inline is the control knob, the solenoid for auto turn on, and the safety valve. That's it!
Each "seems" to be working properly. But the gas is just not coming through. If left to myself, I'm going to start swapping parts from left side to right side to see if it's a "stuck" control knob, a "stuck" safety knob, or "stuck" solenoid (or just remove this for testing).
Not sure if there is a better way. There is no good guides online for taking apart adn adjusting the oven control knob, but I'm really thinking it has to be in the control knob. Like a misalignment somewhere restricting gas flow.
I'd hate to disassemble the control knob for gasket reasons, but not sure it cam be avoided at this point. Maybe someone knows if this is a common ocurrence and if there are comon solutions?