need some opinions

[Tom W.]

I'm thinking about getting the Lee 358-158-rf. I'll probably never hunt with it, but does any one have experience with it? I have a Lyman 148 gr.wc that I can load some cases with, but this looks like something I may very well be interested in. I don't like the Lee SWC and am not a
Fan of TL designs.

[hunter74]

The RF designs from Lee works very well in most revolvers. I've used a lot of 125 RFs in both revolvers and 9mm autos. The only difference is that the 158s are longer, so I can't imagine that it wouldn't work in most guns.

Sent fra min SM-G930F via Tapatalk

[Hickok]

I have that mold and like it. It has a very wide meplat. Works great in my S&W's.

[ranger391xt]

I've used thi,s is my S&W 64 and 64. 3.8 gr of HP-38 for .38 spl
and 6.0 gr of Bullseye for .357 mag are my loads.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[WebMonkey]

I use it in my blackhawk convertible with great success.

[Greg S]

I have a Lym copy of that mold. Easy loading in revolvers over a K style SWC and cycles smoothly in a 92 lever gun.

[Tom W.]

Thanks! I ordered a six cavity mold from Midway ... unfortunately they didn't have any handles in stock.