I recently picked up a C312-185-1R mold.
Lee tells mebut I don't see either as a part number on any of the online vendors I've looked at.You can use Lyman 226 or RCBS 465. We have no info on Hornady.
What gas check to I need for this?
I recently picked up a C312-185-1R mold.
Lee tells mebut I don't see either as a part number on any of the online vendors I've looked at.You can use Lyman 226 or RCBS 465. We have no info on Hornady.
What gas check to I need for this?
regular 30 cal will do.
if they give you grief you may have to bump the size up a bit with a punch.
I have that mold, and I use .30 cal. gas checks. I also size without gas checks, and paper patch. I prefer that to using gas checks with that rifle.
Unless you have a minimum dimension bore you will probably be dissapointed whith that Mould. I had to lap and beagle mine to get the bullets to shoot at all and eventually i made a reamer and reamed it to a round nose design with a 304 diameter on the nose. From the box I never had any problems seating regular Hornady gas checks 30 caliber.
As has been said .30 cal GCs for that boolit,however you really do need to slug your throat/bore to know what the rifle needs.
For fine firearms and shooting requisites visit my Web Site by clicking the link below:
Pukka Bundhooks
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |