I started loading for a Glock 22, 40 s&w and i have cases that wont fit the throat in a KKM barrel.
Will a Lee bulge buster help with my problem to get those cases to fit and if so can i size them with primers in already ?
Thank's, Steve
I started loading for a Glock 22, 40 s&w and i have cases that wont fit the throat in a KKM barrel.
Will a Lee bulge buster help with my problem to get those cases to fit and if so can i size them with primers in already ?
Thank's, Steve
Better to heave the cases in the scrap bin and start over.
Once brass has been expanded past its elastic limits you work harden the case head by forcing it down to fit.
If the barrel doesn't adequately support the case head, you are then setting yourself up for a KABOOM~!
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
Common with cases fired in the Glock barrel on the 40's. The bulge buster will iron them out.
On every question of construction let us carry ourselves back to the time when the Constitution was adopted, recollect the spirit manifested in the debates, and instead of trying what meaning may be squeezed out of the text or invented against it, conform to the probable one in which it was passed.
Thomas Jefferson, letter to William Johnson, June 12, 1823
I run every .40 case I've shot for about 10 years through a Case Master Jr. which does the same as the Bulge Buster. I only run each case through it once and then mark my brass with a Sharpie so I know it's mine and it's already been push through sized. Any unmarked range pickups get the push through treatment because the STI won't chamber bulged brass. If reloaded enough times all .40 brass will split but I've never seen the Glock Bulge area split on one. The side of the case above the web splits in my gun. Absolutely nothing bad happens when they split. The Loads are all USPSA Major.
David
Sometimes life taps you on the shoulder and reminds you it's a one way street. Jim Morris
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |