6-40 taps needed

[redneck1]

Hello
I started a project a few weeks ago and unfortunately I've hit a financial wall . Or to speak plainly I've spent all my cash on some other tools I needed for the build .

So if anyone would happen to have a regular 6-40 tap and a 6-40 bottom tap I'd be eternally greatful . If possible the proper drill to go with would be a huge help as well .

I also wouldn't turn down some .080 and .120 music wire to make springs either .

There are a few other minor items ill need But the taps are the only thing I am in immediate need of .

A couple pics of the project ..

Attachment 193430
Attachment 193431

[WickedColt]

I have a music wire around somewhere. I am not sure about the diameter but I will try to find it and let you know.

[redneck1]

Thank you sir , it would be very appreciated

[chuckbuster]

I can get you the taps and drill.
What material are you working in?
Thanx
Kevin

[redneck1]

Everything that gets drilled and tapped is plain old 1018 mild steel
Actually, everything except the hammer and breech face is mild steel .
So everything should be easy to tap . Still makes me a bit nervous though with the blind holes and tiny tap .

[chuckbuster]

PM me your address

[WickedColt]

I just got back from my trip last night and I looked but couldn't find it. I was pretty tired but I will check again.