Hello All: I'd like to pass along some ideas I'm working with to make the NOE bushing nose sizer a little easier to work with. First, I shortened the bullet push rod that I use from 1.320 to .780. This gives a better point of leverage on the press stroke. Next, I've cut some lengths of copper pipe to various lengths required for different bullets. These sit on the top of the press ram and around the push rod and come up against the push through size body and bushing. This provides a repeatable stop point one bullet to the next. All or just part of the nose can now be sized and fit up tight to the throat, ball seat what ever using the front band or spot on the nose of your choice. Please chip in with any ideas you come up with for other improvements. Thanks Gp