Just too much junk, lol Do know of a person just starting into casting?

[Teddy (punchie)]

I'll going over all of my items and I have a number of small odds I don't need.

List is on going, Odd dies, parts of older Redding scale. Maybe even MEC parts, or items.

maybe a deburring tool.

If you need an items or parts for you to be able to reload/ cast ask, I just may have it.

Post in listing what as others may have it, then PM me what and why you need it, and will see what I can do. Later as I feel up to it, I'll be posting

detailed items in helping hands.

Years ago I recall a number of people giving me items from cast boolits, so now I maybe able to help

someone out. Ask I may have it or maybe get it cheap at a show/ auction etc.

One other thing; Do you need a gun part? I'm going to be looking for a few parts myself, so if you need me to ask around, look for a part for you. Ask and I'll see what I can do, as this can get costly you'll have to paid for part and shipping,(your not paying for my time or gas just the part), but this may help out a few of you.


Have A Good One !!

Teddy

[Jr.]

This is awesome I love this about this forum.

Thanks Teddy!

[toallmy]

It worms my heart every time I see a post like this ,

[Preacher Jim]

thank you Teddy

[Artful]

Teddy, I have a neighbor kid that's interested in reloading - I've given him manuals and am on the look out for inexpensive reloading setup stuff for
him to set up his own bedroom setup in a box
- What do you have that would fit that? (I picked up a hand primer already, on the look out for most everything else so he can reload 223 and 308)

[bbogue1]

I think this offer is absolutely fabulous, it is the heart and soul of this forum. Awesome!!! I can tell you that to me, a new reloader and I am collecting equipment to smelt and then cast your offer is generous and very welcome.
I can think of a few things, I have a pro4 melter, a few pounds of lead and a desire to learn. I slugged my 9mm which is .356 so I am looking for .357, .358 molds. I could use an ingot mold.
Do you have any 310 dies or a single stage press?

PM coming your way........

Thanks for being such a fantastic example.

[Teddy (punchie)]

Teddy, I have a neighbor kid that's interested in reloading - I've given him manuals and am on the look out for inexpensive reloading setup stuff for
him to set up his own bedroom setup in a box
- What do you have that would fit that? (I picked up a hand primer already, on the look out for most everything else so he can reload 223 and 308)

Artful

Think I have a set of 308 dies , I will look again. No extra 223
dies. May have some brass in both do you need it?

Teddy

[Baryngyl]

I been trying to help a younger guy get into reloading, so far he has a Lee single stage press, plus he has the use of all my stuff but he still needs dies, 9mm and 40 S&W as I do not yet have any guns for those so do not have dies for them.

For the moment he is able to use my 30-30 dies if he decides to load for his 30-30, unless someone has some to pass on to him, I think that is the only 3 calibers he has, I will have to ask him when I see him in the next day or so.


Michael Grace

[Artful]

Artful

Think I have a set of 308 dies , I will look again. No extra 223
dies. May have some brass in both do you need it?

Teddy

No I got brass covered - Let me know

[hwilliam01]

Teddy,

I am just getting into cast bullets. I have the equipment to cast for 30-30, but desperately looking for a mold for the 32 Winchester Special. Also looking for a sizing die for the the 32 WS. I can pay an reasonable amount for the part, just need to know where I can get it and some advice/expertise on how to use it.

Thanks!

Bill

[Hick]

Bill

I was in the same situation looking for molds for 32 WS-- found old Lyman/Ideal molds on Gunbroker.com. I got a nice 321427 single cavity for under $40 including the mold handles. You might want to try gunbroker.

Hick

[brassrat]

I know of a shop with unusual old stuff coming and going like dies. I have 22/250.. 06.. and 308 and no guns. will look for 32 or others if posted...and if ya trust me cause I got enough unused dies

[Teddy (punchie)]

Be a few days before I'll get back to looking into some of these items.

[Teddy (punchie)]

Teddy,

I am just getting into cast bullets. I have the equipment to cast for 30-30, but desperately looking for a mold for the 32 Winchester Special. Also looking for a sizing die for the the 32 WS. I can pay an reasonable amount for the part, just need to know where I can get it and some advice/expertise on how to use it.

Thanks!

Bill

Hi Bill

What size of H&I die are you looking for ?

Teddy

[Teddy (punchie)]

I'm not feeling well but as I get a chance here the on going list.

Looking for Lyman bushings (I have a hand full somewhere) for dsh1106 .

And bbogue1 needs a set of die; 45 Auto dies (I have the dies but no stems yet) . And also looking for a press ( maybe ). 9mm .357, .358 molds .

Artful need a set of 308 dies (should have a set).

Baryngyl needs 9mm (Maybe ?) and 40 S&W (I don't think so ).

Teddy






Baryngyl

[Traffer]

What a great way to get rid of some stuff you don't need. Instead of putting it up for grabs by the first guy that sees it. Have some new person who really needs it ask. Good Job Teddy! I hope this helps someone who is getting started.

[Teddy (punchie)]

Ok been a little longer to find some of this stuff then I thought it would be.

Artful have your 308 Dies Lyman look clean and ready to use, let me know where to ship.

dsh1106 found the Lyman Bushings , if it were a snake I'd be dead, right in top corner of tool box, I store molds in.
H-G, H-G, H-15,H-17, and H-10.

Teddy

[BrassMagnet]

I'm not feeling well but as I get a chance here the on going list.

Looking for Lyman bushings (I have a hand full somewhere) for dsh1106 .

And bbogue1 needs a set of die; 45 Auto dies (I have the dies but no stems yet) . And also looking for a press ( maybe ). 9mm .357, .358 molds .

Artful need a set of 308 dies (should have a set).

Baryngyl needs 9mm (Maybe ?) and 40 S&W (I don't think so ).

Teddy






Baryngyl

I probably have the stems.

[RKJ]

Teddy, If you have a sizer die &/or top punch for the 45/70, I'd buy them. I know it's a long shot, but figure I'd ask.
Artful, what else does this young man need?

[Teddy (punchie)]

Teddy, If you have a sizer die &/or top punch for the 45/70, I'd buy them. I know it's a long shot, but figure I'd ask.
Artful, what else does this young man need?

RKJ what size are you looking for in the 45/70 ? and top punch. I was just getting ready to post them for sale. PM me also is the best way to make sure I see it.

Yes artful let me know before I ship dies.

Primer pocket cleaners, de-burring tool, Funnel but wouldn't fit cost more to ship then worth ?