RotoMetals2WidenersLoad DataInline Fabrication
Reloading EverythingRepackboxLee PrecisionSnyders Jerky
MidSouth Shooters Supply Titan Reloading
Results 1 to 13 of 13

Thread: Hornady 125gr SST and the .300 BLK

  1. #1
    Boolit Buddy three50seven's Avatar
    Join Date
    Feb 2015
    Location
    Indiana
    Posts
    319

    Hornady 125gr SST and the .300 BLK

    Just finished up doing some testing with this bullet in the .300 BLK, I thought other may be interested in the results. Details are below.

    - Rifle: Ruger American Rifle Ranch .300 BLK 1:7 twist
    - Bullet: Hornady 125gr SST
    - Brass: unfired Remington factory .300 BLK
    - Primer: Remington Small Rifle
    - Powder: H110 & Lil' Gun
    - Distance: 50yds
    - Temp: 40°F

    I started with a 5 shot group of Hornady American Gunner 125gr HP to foul the barrel and have something to compare to. I then followed with 5 shots each: 17gr H110, 17.5gr H110, 18gr H110, 20gr Lil' Gun, and 21gr Lil' Gun. Depending on the data you look at, the LG loads were over max, but they are right at max according to Hodgdon. The pics really tell the story, the Lil' Gun performed the best and according to the data should definitely be fastest. The yellow dots are 1" diameter.







    Sent from my LGLS775 using Tapatalk


    Sent from my LGLS775 using Tapatalk

  2. #2
    Boolit Master

    TCLouis's Avatar
    Join Date
    Mar 2005
    Location
    Middle TN
    Posts
    4,404
    Any idea what the velocity might be?
    Amendments
    The Second there to protect the First!

  3. #3
    Perma-Banned
    Join Date
    Dec 2015
    Location
    Idaho
    Posts
    1,728
    Nothing wrong with any of those groups!

  4. #4
    Boolit Buddy three50seven's Avatar
    Join Date
    Feb 2015
    Location
    Indiana
    Posts
    319
    Quote Originally Posted by TCLouis View Post
    Any idea what the velocity might be?
    The 18gr of H110 should be running close to 2200fps and the 21gr of Lil' Gun should be clocking in at ~2400fps according to Hodgdon. Just as a note, the 21gr of Lil' Gun is a compressed charge and I did notice​ flattening on a couple of the primers. I will probably stick to 20gr as a go-to load with this bullet.

    Sent from my LGLS775 using Tapatalk
    Last edited by three50seven; 03-18-2017 at 08:30 AM.

  5. #5
    Boolit Buddy three50seven's Avatar
    Join Date
    Feb 2015
    Location
    Indiana
    Posts
    319
    Quote Originally Posted by 54bore View Post
    Nothing wrong with any of those groups!
    Really you're right, without the fliers on the first two groups (which could have been me) they're all pretty darn good.

    Sent from my LGLS775 using Tapatalk

  6. #6
    Boolit Buddy
    Join Date
    Oct 2015
    Posts
    230
    how hot was the barrel after shooting the lil gun?

  7. #7
    Boolit Buddy three50seven's Avatar
    Join Date
    Feb 2015
    Location
    Indiana
    Posts
    319
    Quote Originally Posted by BigMagShooter View Post
    how hot was the barrel after shooting the lil gun?
    I didn't check. It was only 10 rounds, and they were fired slowly, so I doubt it heated up too bad.

    Sent from my LGLS775 using Tapatalk

  8. #8
    Moderator
    Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    14,412
    Looking good.

  9. #9
    Boolit Master
    Join Date
    Sep 2012
    Location
    NE Wisconsin
    Posts
    1,441
    This is one of my favorite cartridges I have a heavy barrel Remington Tactical rifle

  10. #10
    Boolit Master


    nagantguy's Avatar
    Join Date
    Mar 2013
    Location
    MI
    Posts
    2,704
    My test was very similar to yours only different bullets 125 grain speed hps and 125 grain Barnes with h110 and 296 and lillgun I was very happy with the groups out to 100! I didn't chrono them but I will next time, I've having a blast with this cartridge! And good shooting three50seven!
    Last edited by nagantguy; 03-24-2017 at 05:20 PM.

  11. #11
    Boolit Buddy three50seven's Avatar
    Join Date
    Feb 2015
    Location
    Indiana
    Posts
    319
    Quote Originally Posted by nagantguy View Post
    My test was very svery molar to yours only different bullets 125 grain speed hps and 125 grain Barnes with h110 and 296 and lillgun I was very happy with the groups out to 100! I didn't chrono them but I will next time, I've having a blast with this cartridge! And good shooting three50seven!
    I'm anxious to try these at 100 as well. The 300 Blk is a fun little cartridge for sure, I thoroughly enjoy loading and shooting it!

    Sent from my LGLS775 using Tapatalk

  12. #12
    Boolit Grand Master


    Larry Gibson's Avatar
    Join Date
    Jul 2005
    Location
    Lake Havasu City, Arizona
    Posts
    21,323
    three50seven

    If you don't mind could you tell me the length of the 125 SST? Thanks

    Larry Gibson

  13. #13
    Boolit Buddy three50seven's Avatar
    Join Date
    Feb 2015
    Location
    Indiana
    Posts
    319
    Quote Originally Posted by Larry Gibson View Post
    three50seven

    If you don't mind could you tell me the length of the 125 SST? Thanks

    Larry Gibson
    I'm not home where I can measure them right now, but I can tell you that I seated them at the cannelure and OAL was 2.10"

    Sent from my LGLS775 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check